TRACO POWER DC/DC Converter, 12V/ 8.4 A, 18V Input, 9V Input 100 W, Through Hole, 75 °C Max Temp -40 °C Min Temp, 9-Pin

暫時無法供應
我們無法確定此產品何時有貨,RS 預計將其從我們的產品目錄中移除。
RS庫存編號:
706-6401
製造零件編號:
TEP 100-1212
製造商:
TRACO POWER
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

TRACO POWER

Output Voltage 1

12V

Product Type

DC/DC Converter

Minimum Input Voltage

9V

Maximum Input Voltage

18V

Output Current 1

8.4A

Mount Type

Through Hole

Input Ratio

2:1

Number of Outputs

5

MTBF

331000h

Output Voltage Adjustment Range

-20 → 10 %

Number of Pins

9

Isolation Voltage

2.25kV

Maximum Output Power

100W

Package Type

Surface Mount

Standards/Approvals

No

Depth

12.7mm

Length

61mm

Minimum Operating Temperature

-40°C

Efficiency

91%

Maximum Operating Temperature

75°C

COO (Country of Origin):
TW

Traco 100W Single Output Regulated Isolated DC-DC Converter - TEP-100 Series


100W single output regulated isolated high performance PCB mount dc-dc converter modules in a rugged, sealed metal case with four threaded M3 inserts for attachment of a heatsink (see 706-6420 for suitable heatsink). This single output high performance PCB mount dc-dc converter modules have a high efficiency allowing an operating temperature up to +60°C with natural convection cooling without power derating, output voltage trimming and remote On/Off.

Wide 2:1 input voltage range

Soft start

Remote On/Off

Output current limitation

Input protection filter

Under voltage lockout

Reverse input voltage protection

Over temperature, over voltage and short circuit protection

Traco - 75W to 240W - TEP Series


Note

MTBF to MIL-HDBK-217F (25°C) ,Derate above 60°C
For suitable common mode chokes:
TEP 100-12xx and TEP 10-24xx : see stock number 745-1228 (L1 and L2)
TEP 100-48xx : see stock number 745-1212 (L1) and stock number 745-1225 (L2)

Standards

UL 60950-1, IEC 60950-1, EN 60950-1

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。