TRACO POWER DC/DC Converter, 19.2V/, 75V Input 3.2 A, 18V Input, 75 °C Max Temp -40 °C Min Temp
- RS庫存編號:
- 666-2815
- 製造零件編號:
- TEP 75-4815WI-CMF
- 製造商:
- TRACO POWER
享受批量購買折扣
額外添加5件可節省TWD730.00
查看批量定價選項小計(1 件)*
TWD7,330.00
(不含稅)
TWD7,696.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
- 加上 2 件從 2027年1月28日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 節省 |
|---|---|---|
| 1 - 4 | TWD7,330.00 | - |
| 5 - 9 | TWD7,184.00 | TWD730.00 |
| 10 - 24 | TWD7,040.00 | TWD2,900.00 |
| 25 - 49 | TWD6,899.00 | TWD10,775.00 |
| 50 + | TWD6,762.00 | TWD28,400.00 |
* 參考價格
- RS庫存編號:
- 666-2815
- 製造零件編號:
- TEP 75-4815WI-CMF
- 製造商:
- TRACO POWER
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | TRACO POWER | |
| Product Type | DC/DC Converter | |
| Output Voltage 1 | 19.2V | |
| Maximum Input Voltage | 75V | |
| Minimum Input Voltage | 18V | |
| Output Current 1 | 3.2A | |
| Output Voltage 2 | 26.4V | |
| MTBF | 336000h | |
| Number of Outputs | 5 | |
| Output Voltage Adjustment Range | -20 → 10 % | |
| Isolation Voltage | 2.25kV | |
| Input Ratio | 4:1 | |
| Maximum Output Power | 75W | |
| Length | 61mm | |
| Depth | 30mm | |
| Standards/Approvals | No | |
| Efficiency | 88% | |
| Maximum Operating Temperature | 75°C | |
| Minimum Operating Temperature | -40°C | |
| 選取全部 | ||
|---|---|---|
品牌 TRACO POWER | ||
Product Type DC/DC Converter | ||
Output Voltage 1 19.2V | ||
Maximum Input Voltage 75V | ||
Minimum Input Voltage 18V | ||
Output Current 1 3.2A | ||
Output Voltage 2 26.4V | ||
MTBF 336000h | ||
Number of Outputs 5 | ||
Output Voltage Adjustment Range -20 → 10 % | ||
Isolation Voltage 2.25kV | ||
Input Ratio 4:1 | ||
Maximum Output Power 75W | ||
Length 61mm | ||
Depth 30mm | ||
Standards/Approvals No | ||
Efficiency 88% | ||
Maximum Operating Temperature 75°C | ||
Minimum Operating Temperature -40°C | ||
- COO (Country of Origin):
- TW
Traco 75W Single Output Regulated Isolated DC-DC Converter with Chassis Mount Adaptor and EMI Filter - TEP-75WI Series
75W single output regulated isolated high performance dc-dc converter modules in a rugged, sealed metal case. These DC-DC converter modules are chassis mount with a screw terminal block and input filter to meet EN 555022 class A. These dc-dc converters have a high efficiency allowing an operating temperature up to +60°C with natural convection cooling without power derating, output voltage trimming and remote On/Off. These DC-DC converters are ideal for use on industrial applications where PCB mounting is not possible.
Ultra wide 4:1 input voltage range
Chassis mount converter with screw terminal connections
Soft start
Full load operation up to 60°C with convection cooling
Remote On/Off
Output current limitation
Input protection filter
Under voltage lockout
Reverse input voltage protection
Over temperature, over voltage and short circuit protection
Traco - 75W to 240W - TEP Series
Note
MTBF to MIL-HDBK-217F (25°C)
Derate above 60°C
An optional DIN rail mounting kit is available - see stock number 745-1102
Derate above 60°C
An optional DIN rail mounting kit is available - see stock number 745-1102
Standards
UL 60950-1, IEC 60950-1, EN 60950-1
相關連結
- TRACO POWER TEP 100 DC/DC Converter 75V dc Input 4.2 A Chassis Mount, 75 °C Max Temp -40 °C Min
- TRACO POWER TEP 75WI DC/DC Converter 36V dc Input 3.2 A Chassis Mount, 75 °C Max Temp -40 °C Min
- TRACO POWER TEP 100 DC/DC Converter 36V Input 4.2 A 75 °C Max Temp -40 °C Min Temp
- TRACO POWER DC/DC Converter 18V Input 4.2 A 75 °C Max Temp -40 °C Min Temp
- TRACO POWER DC/DC Converter 75V Input 6.3 A 75 °C Max Temp -40 °C Min Temp
- TRACO POWER DC/DC Converter 75V Input 1.6 A 75 °C Max Temp -40 °C Min Temp
- TRACO POWER TEP 100 DC/DC Converter 36V dc Input 4.2 A Chassis Mount, 75 °C Max Temp -40 °C Min
- TRACO POWER DC/DC Converter 75V Input Through Hole 9-Pin
