HARTING D-Sub 9 Way Straight 2.77 mm Pitch Panel Mount D-Sub Connector Male

This D-Sub connector is a panel-mount Interface designed to join cable-to-cable and PCB-to-cable connections in demanding environments. It features a straight orientation and solder cup termination to accommodate wire attachment by hand or machine. The housing is steel with a tin finish and the insert is glass-fibre-filled thermoplastic, providing mechanical support for turned contacts. Rated for up to 1000V test voltage, it suits installations where a Compact multiway connector is required.

• 7.5A rated current enables reliable signal and low-power distribution
• Gold-plated contacts reduce contact resistance for consistent conductivity
• -55 to 125°C temperature range permits high-temperature operation
• 250 mating cycle durability reduces connector replacement frequency
• Fixing flange with Ø3.1mm hole secures panel-mount installations

• Suitable for industrial control cabinet interconnections
• Used with measurement equipment requiring multiway signal links
• Ideal for railway vehicle interior electronic interfaces
• Can be used for cable assemblies in harsh temperature ranges

Contacts are MADE from a copper alloy which provides good conductivity and mechanical strength for repeated mating.

Wires are terminated using solder cup termination designed for manual or reflow soldering processes.

Insulation resistance exceeds 10^10 Ω and both clearance and creepage distances are at least 1mm.

Insertion force is specified as ≤30N and a withdrawal force range includes ≥3.3N up to ≤20N to ensure stable connections.

The insert meets UL94V-0 flammability classification and the product lists lead as an identified SVHC.

For Shell housings see typically 740-7269 and range.

IEC 60 807