Amphenol Communications Solutions FCE17 9 Way Right Angle 2.74 mm Pitch Through Hole D-Sub Connector, with 4 to 40 UNC

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有D Sub Connectors
可享批量折扣

小計（1 件）*

TWD672.00

(不含稅)

TWD705.60

(含稅)

Add to Basket
選擇或輸入數量
庫存資訊目前無法存取 - 請稍後再回來查看

單位
每單位
1 - 14TWD672.00
15 - 29TWD655.00
30 +TWD646.00

* 參考價格

RS庫存編號:
704-7573
製造零件編號:
FCE17-E09SB-410
製造商:
Amphenol Communications Solutions
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Amphenol Communications Solutions

Product Type

D-Sub Connector

Number of Contacts

9

Orientation

Right Angle

Current

5A

Mount Type

Through Hole

Connector Gender

Female

Mounting Hardware

4 to 40 UNC Threaded Insert

D-Sub Shell Size

E

Housing Material

Thermoplastic

Voltage

300V

Termination Type

Solder

Minimum Operating Temperature

-40°C

Contact Gender

Female

Maximum Operating Temperature

85°C

Standards/Approvals

No

Contact Material

Phosphor Bronze

Series

FCE17

Contact Plating

Gold over Nickel

Pitch

2.74mm

COO (Country of Origin):
CN

Amphenol Right Angle B Connectors


These Amphenol Filtered D-Sub FCE17 Series Right Angle Pin or Socket connectors are PCB mounted.

Filter Capacitance of 470 pF and 820 pF are available indicated by a 1or 4 in the Manufacturers Part Number i.e. FCE17-*****-*X** respectively

#4-40 UNC threaded Jack Screw holes

PCB Footprint B (10.29 mm)

Boardlocks are Tin plated Copper alloy

Insulation Resistance 3000 MΩ

Contact Resistance 15 mΩ

Amphenol Filtered 'D' Connectors


These filtered connectors are compact interconnect devices that can filter unwanted EMI. The capacitors are mounted inside the connector between each of the contacts and the connector ground shell. They provide:

Better EMI Control – With minimized lead inductances and short, direct paths to ground of the filter, performance will typically out perform the same filter components on a P.C.B. by a factor of three to one

PCB Space Savings – Incorporating filter elements into the connector, enables simplification of the required filter schematic for the necessary performance plus a savings of 2-4 square inches

Cost Savings – Filter elements, such as inductors and capacitors, must no longer be purchased, stocked, assembled or tested. Fewer components means greater reliability at lower cost

Easy EMI/RFI Upgrade – These compact filtered connectors fit standard non-filtered connector footprints. For improved EMC performance, simply replace the existing connector with a filtered connector

EMC Compliance & Immunity – EMI that is generated from the electronic device, radiated or conducted, will be re-directed to chassis ground through the connector shell. This same device will also protect the system from external EMI/RFI noise (such as radio transmitters, ESD, or natural phenomena such as lightning) in the same way

相關連結