小計(1 件)*
TWD7,330.00
(不含稅)
TWD7,696.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD7,330.00 |
* 參考價格
- RS庫存編號:
- 815-6388
- 製造零件編號:
- 77 32 120 H
- 製造商:
- Knipex
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 16mm | |
| Overall Length | 120mm | |
| Jaw Length | 14mm | |
| VDE/1000V Approved | No | |
| Application | Electronic | |
| Height Safe | No | |
| Jaw Material | Steel | |
| ESD Safe | No | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 1.6mm | |
| Standards/Approvals | ISO 9654 | |
| Cut Type | Small Bevel | |
| 選取全部 | ||
|---|---|---|
品牌 Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 16mm | ||
Overall Length 120mm | ||
Jaw Length 14mm | ||
VDE/1000V Approved No | ||
Application Electronic | ||
Height Safe No | ||
Jaw Material Steel | ||
ESD Safe No | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 1.6mm | ||
Standards/Approvals ISO 9654 | ||
Cut Type Small Bevel | ||
不相容
- COO (Country of Origin):
- DE
KNIPEX 77 32 120 H Electronics Diagonal Cutter with carbide cutting edges with multi-component handles 120 mm
77 32 120 H Electronics Diagonal Cutter with carbide cutting edges For extreme demands on cutting pliers caused by hard or tough materials, e.g. piano, nickel, tungsten and diode wire, such as those used more frequently in the electronics and aerospace industries. Always the right cutting tool, even with the hardest material. Precision carbide metal cutting edges soldered into forged blanks. Sturdy, zero-backlash box joint. Hardness of the carbide cutting edges 80 – 83 HRC. Pliers with carbide metal cutting edges have a substantially longer service life than such with conventional cutting edges. Constantly reliable cutting results due to the avoidance of cutter deformations caused by overloading. High cost saving due to longer service life of the pliers. pointed head with chamfer. with small bevel. - Cutting capacities medium hard wire (diameter): Ø 1.0mm- Cutting capacities hard wire (diameter): Ø 0.6mm- Cutting capacities piano wire (diameter): Ø 0.2mm- Cutting capacities soft wire (diameter): Ø 1.6mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 7.5mm- Head width (A): 11mm
Features and Benefits
Pointed Head With Chamfer
With Small Bevel
With Small Bevel
Technical attributes
For Extreme Demands On Cutting Pliers Caused By Hard Or Tough Materials, E.G. Piano, Nickel, Tungsten And Diode Wire, Such As Those Used More Frequently In The Electronics And Aerospace Industries
Always The Right Cutting Tool, Even With The Hardest Material
Precision Carbide Metal Cutting Edges Soldered Into Forged Blanks
Sturdy, Zero-Backlash Box Joint
Hardness Of The Carbide Cutting Edges 80 – 83 Hrc
Always The Right Cutting Tool, Even With The Hardest Material
Precision Carbide Metal Cutting Edges Soldered Into Forged Blanks
Sturdy, Zero-Backlash Box Joint
Hardness Of The Carbide Cutting Edges 80 – 83 Hrc
相關連結
- Knipex Knipex ESD Safe 1.6 mm Small Bevel Side cutter
- Knipex Knipex 1.6 mm Small Bevel Side cutter
- Knipex Knipex 1.3 mm Small Bevel Side cutter
- Knipex Knipex ESD Safe 800 μm Small Bevel Side cutter
- Knipex Knipex 1.6 mm Without Bevel Side cutter
- Knipex Knipex 1.6 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.6 mm With Bevel Side cutter
- Knipex Knipex 3 mm Small Bevel Side cutter
