小計(1 件)*
TWD1,521.00
(不含稅)
TWD1,597.05
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 16 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD1,521.00 |
* 參考價格
- RS庫存編號:
- 267-7112
- 製造零件編號:
- 76 01 125
- 製造商:
- Knipex
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Jaw Width | 14.5mm | |
| Overall Length | 125mm | |
| Jaw Length | 16mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Jaw Material | Vanadium Electric Steel | |
| ESD Safe | No | |
| Grip Material | Plastic | |
| Handle Material | Plastic | |
| Standards/Approvals | DIN ISO 5749 | |
| Maximum Cutting Capacity | 3mm | |
| Cut Type | With Bevel | |
| 選取全部 | ||
|---|---|---|
品牌 Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Jaw Width 14.5mm | ||
Overall Length 125mm | ||
Jaw Length 16mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Jaw Material Vanadium Electric Steel | ||
ESD Safe No | ||
Grip Material Plastic | ||
Handle Material Plastic | ||
Standards/Approvals DIN ISO 5749 | ||
Maximum Cutting Capacity 3mm | ||
Cut Type With Bevel | ||
不相容
- COO (Country of Origin):
- DE
KNIPEX 76 01 125 Diagonal Cutter for electromechanics with plastic coating black atramentized 125 mm
76 01 125 Diagonal Cutter With sharp, precisely aligned cutting edges. Cutting edges additionally induction-hardened, cutting edge hardness approx. 63 HRC. Lap joint. with bevel. - Cutting capacities medium hard wire (diameter): Ø 2.3mm- Cutting capacities hard wire (diameter): Ø 1.5mm- Cutting capacities piano wire (diameter): Ø 0.6mm- Cutting capacities soft wire (diameter): Ø 0.4 – 3mm- Jaw length (B): 16mm- Jaw thickness (joint) (D): 9mm- Head width (A): 14.5mm
Technical attributes
With Sharp, Precisely Aligned Cutting Edges
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 63 Hrc
Lap Joint
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 63 Hrc
Lap Joint
相關連結
- Knipex Knipex 3 mm With Bevel Side cutter
- Knipex Knipex 3 mm Small Bevel Side cutter
- Knipex Knipex 2.5 mm Without Bevel Side cutter
- Knipex Knipex 1.7 mm Small Bevel Side cutter
- Knipex Knipex With Bevel Side cutter
- Knipex Knipex 1.7 mm With Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex 1.5 mm With Bevel Side cutter
