小計(1 件)*
TWD2,432.00
(不含稅)
TWD2,553.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 7 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD2,432.00 |
* 參考價格
- RS庫存編號:
- 267-7111
- 製造零件編號:
- 75 52 125
- 製造商:
- Knipex
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Overall Length | 125mm | |
| Jaw Width | 10.5mm | |
| Jaw Length | 14mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Hard and Piano Wire, Soft | |
| ESD Safe | No | |
| Jaw Material | High Grade Special Tool Steel | |
| Handle Material | Plastic | |
| Grip Material | Plastic | |
| Maximum Cutting Capacity | 800μm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | With Bevel | |
| 選取全部 | ||
|---|---|---|
品牌 Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Overall Length 125mm | ||
Jaw Width 10.5mm | ||
Jaw Length 14mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Hard and Piano Wire, Soft | ||
ESD Safe No | ||
Jaw Material High Grade Special Tool Steel | ||
Handle Material Plastic | ||
Grip Material Plastic | ||
Maximum Cutting Capacity 800μm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type With Bevel | ||
不相容
- COO (Country of Origin):
- DE
KNIPEX 75 52 125 Electronics Diagonal Cutter with plastic handles burnished 125 mm
75 52 125 Electronics Diagonal Cutter For ultra fine cutting work, e.g. in electronics and fine mechanics. With sharp, ground cutting edges for soft and hard wire and piano wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Low-friction double spring for smooth and even opening. particularly narrow head, with bevel. - Cutting capacities medium hard wire (diameter): Ø 0.5mm- Cutting capacities hard wire (diameter): Ø 0.3mm- Cutting capacities soft wire (diameter): Ø 0.2 – 0.8mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 6.5mm- Head width (A): 10.5mm
Technical attributes
For Ultra Fine Cutting Work, E.G. In Electronics And Fine Mechanics
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
相關連結
- Knipex Knipex 800 μm With Bevel Side cutter
- Knipex Knipex ESD Safe 800 μm Small Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter
- Knipex Knipex 1.5 mm Bevel Side cutter
- Knipex Knipex 1 mm With Bevel Side cutter
- Knipex Knipex 800 μm Small Bevel Tip Cutter
- Knipex Knipex 3 mm Small Bevel Side cutter
