CK ESD Safe 20 mm Full Flush Side cutter

RS庫存編號:: 132-0976
製造零件編號:: T3781DEF115
製造商:: CK

CK ESD Safe 20 mm Full Flush Side cutter

查看所有Cutters

小計（1 件）*

TWD2,434.00

(不含稅)

TWD2,555.70

(含稅)

訂單超過 $1,300.00 免費送貨

有庫存

12 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD2,434.00

* 參考價格

RS庫存編號:: 132-0976
製造零件編號:: T3781DEF115
製造商:: CK

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	CK
	Product Type	Side cutter
	Sub Type	Side Cutter
	Jaw Width	7.50mm
	Overall Length	125mm
	Jaw Length	13mm
	Application	ESD Electronic Pliers and Cutter
	Jaw Material	Special Alloy Steel
	ESD Safe	Yes
	Grip Material	2 Component
	Handle Material	Dual Component
	Standards/Approvals	DIN EN 61340 5.1 & 5.2
	Maximum Cutting Capacity	20mm
	Cut Type	Full Flush

	選取全部
	品牌 CK
	Product Type Side cutter
	Sub Type Side Cutter
	Jaw Width 7.50mm
	Overall Length 125mm
	Jaw Length 13mm
	Application ESD Electronic Pliers and Cutter
	Jaw Material Special Alloy Steel
	ESD Safe Yes
	Grip Material 2 Component
	Handle Material Dual Component
	Standards/Approvals DIN EN 61340 5.1 & 5.2
	Maximum Cutting Capacity 20mm
	Cut Type Full Flush

Datasheet

豁免

COO (Country of Origin):: DE

CK ESD Bevel Side Cutter, 20mm Maximum Cutting Capacity, 125mm Length - T3781DEF115

This side cutter is an electrostatic-discharge‑safe tool designed for precision work on sensitive electronic assemblies. It combines an anti‑static construction with a flush‑cut geometry to remove components and trim leads while minimising the risk of ESD damage. The tool is intended for controlled environments where static‑safe handling is required.

Features and Benefits:

• Full flush cutting maintains near‑surface trim for neat finishes
• Special alloy steel jaws deliver Durable cutting edges
• 75 mm jaw width enables close access to confined areas
• Dual‑component handles reduce slippage during repetitive work
• ESD protection conforms to DIN EN 61340 5.1 & 5.2 standards

Applications

• Suitable for trimming component leads on populated boards
• Ideal for use in static‑controlled assembly benches
• Used with delicate electronic modules requiring ESD precautions
• Can be used for precision cable and wire end trimming
• Suitable for rework stations handling small SMD components

What jaw geometry allows near‑surface cuts?

The tool uses a full flush‑cut profile that leaves minimal protrusion after trimming.

How does the handle construction assist grip control?

The handles use a dual‑component material to combine firmness with a softer overmould for improved hand contact.

What certification ensures suitability in ESD environments?

Compliance with DIN EN 61340 5.1 & 5.2 indicates the tool meets requirements for electrostatic control.

What limits the cutting capability for thicker materials?

The cutter’s rated maximum cutting capacity is 20 mm, which defines its effective material thickness range.

What jaw dimensions support fine work in tight spaces?

The jaws measure 13 mm in length with a 7.5 mm width to permit precise access in confined areas.