Weller Erem Super Full Flush ESD Safe Side cutter

RS庫存編號:: 182-357
Distrelec 貨號:: 180-51-245
製造零件編號:: 2432E
製造商:: Weller Erem

Weller Erem Super Full Flush ESD Safe Side cutter

小計（1 件）*

TWD3,137.00

(不含稅)

TWD3,293.85

訂單超過 $1,300.00 免費送貨

有庫存

22 件準備從其他地點送貨
加上 6 件從 2026年8月27日起發貨
加上 24 件從 2026年10月08日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD3,137.00

* 參考價格

RS庫存編號:: 182-357
Distrelec 貨號:: 180-51-245
製造零件編號:: 2432E
製造商:: Weller Erem

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Weller Erem
	Product Type	Side cutter
	Sub Type	Side Cutter
	Overall Length	130mm
	Jaw Width	11mm
	Jaw Length	12mm
	VDE/1000V Approved	No
	Application	Electronic
	ESD Safe	Yes
	Jaw Material	Steel
	Handle Material	Ergonomic
	Maximum Cutting Capacity	1.6mm
	Standards/Approvals	RoHS
	Cut Type	Super Full Flush

	選取全部
	品牌 Weller Erem
	Product Type Side cutter
	Sub Type Side Cutter
	Overall Length 130mm
	Jaw Width 11mm
	Jaw Length 12mm
	VDE/1000V Approved No
	Application Electronic
	ESD Safe Yes
	Jaw Material Steel
	Handle Material Ergonomic
	Maximum Cutting Capacity 1.6mm
	Standards/Approvals RoHS
	Cut Type Super Full Flush

Datasheet-2432E

豁免

COO (Country of Origin):: CH

Weller Side cutter, 130mm Overall Length, 1.6mm Maximum Cutting Capacity - 2432E

This side cutter is a precision hand tool designed for electronic work, combining a Sharp cutting profile with an electrostatic-safe build for controlled component trimming in assembly and repair environments. It is suited to technicians and engineers working on delicate circuitry where minimised material deformation and static protection are required.

Features and Benefits:

• Super full flush cutting provides near-zero protrusion for neat trims
• Maximum cutting capacity 1.6mm enables clean severing of small conductors
• ESD‑safe construction reduces risk of static damage to components
• RoHS conformity supports use in regulated electronic production
• Steel jaws deliver sustained hardness and edge retention

Applications

• Suitable for precision wire trimming during PCB assembly
• Ideal for removal of component leads after soldering
• Used for cutting small-diameter cable in control cabinets
• Can be used for maintenance tasks in automation equipment

What jaw geometry aids in close-to-surface cutting?

The tool employs a diagonal-style jaw with a reduced tip profile to achieve flush cuts that leave minimal material above the cut plane.

How does the handle design improve operator use during repeated tasks?

The ergonomic handle material is shaped for reduced hand fatigue and improved grip stability during repetitive trimming operations.

Is the tool suitable for larger conductors or heavy-duty cutting?

The rated maximum cutting thickness is 1.6mm, so it is intended for small conductors and component leads rather than thicker cables.

What materials are used for the cutting edges to maintain performance?

The jaws are manufactured from steel to ensure hardness and maintain a Sharp cutting edge under typical electronic workshop use.