Weller Erem ESD Safe Oblique Cutters

Low-force diagonal cutter
Gripping pressure is distributed across the palm to reduce fatigue
Fingers and thumb automatically adopt the optimum position
Soft foam grip, easy to replace, ESD protection

Universal diagonal cutters with bevel
Max. Cutting capacity: Cu 1.6 mm
length: 130 mm

Universal diagonal cutters with bevel
Perfectly flush cut
Max. Cutting capacity: Cu 1.6 mm
length: 130 mm

Ergonomic tip cutter side face, cutting angle 45°
Ideal for working on PCBs, for cutting component connections and wiring
Max. Cutting capacity: Cu 1.2 mm
Length: 135 mm

The 2482E angled tipped cutters from Weller provide precise cuts at a number of angles. The ergonomic handles allow for reduced fatigue in hands when working over long periods. Made from tough and durable tool steel that makes it suitable for working on electronic boards, component connections due to the ESD protection. The 45° cutting angle coupled with a maximum cutting capacity of 1.2 mm for copper wire and 0.6 for medium hardness wire

• Protection of electronic components from risks of electrostatic discharge (ESD)

• ESD compliant for safe use on sensitive electronic components

• Spring return system reduces effort and strain

• Angled Narrow Head Cutters

• Overall length: 135mm

• Cuts copper and Nickel wires Ø: 0.1 – 1.2mm

• Weight: 72g

Cutters are hand tools used to cut through wires and are available in a range of shapes and sizes to suit a variety of tasks and applications. The most common type of cutter head is oval, tapered and angled. The type of cut produced depends on the bevel of the cutter. Semi-flush cutters are more durable and produce a quick cut rough rougher edges, whereas an ultra-flush bevel will produce a much cleaner cut but is susceptible to damage. Cutters are commonly used in applications such as:

• DIY
• Industrial
• Construction
• Electronic Installation

Do not force cutters to cut through material that is too hard for them as it can damage the blades by chipping or blunting them. These hand tools can be cleaned with soap and water, especially the blades, to remove dirt which could cause issues with the joints and encourage corrosion.

This cutter is suitable to cut copper wires 0.1 to 1.2mm.

The 2482E provides a flush cut at 45°.