Fluke 715 Current & Voltage Calibrator, Max Voltage 20V 20 mA

RS庫存編號:: 263-2700
Distrelec 貨號:: 176-78-006
製造零件編號:: FLUKE 715
製造商:: Fluke

Fluke 715 Current & Voltage Calibrator, Max Voltage 20V 20 mA

小計（1 件）*

TWD69,165.00

(不含稅)

TWD72,623.25

訂單超過 $1,300.00 免費送貨

有庫存

11 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD69,165.00

* 參考價格

RS庫存編號:: 263-2700
Distrelec 貨號:: 176-78-006
製造零件編號:: FLUKE 715
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Product Type	Current & Voltage Calibrator
	Maximum Voltage Measurement	20V
	Maximum Current Measurement	20mA
	Accuracy	± 0.01 %
	Standards/Approvals	CSA C22.2 No. 1010.1:1992
	Power Source	Battery
	Battery Type	Alkaline
	Weight	330g
	Height	201mm
	Length	187mm
	Maximum Operating Temperature	55°C
	Hazardous Area Certification	No
	Maximum Source Current	24mA
	Model Number	715
	Minimum Operating Temperature	-10°C
	Minimum Source Current	4mA
	Minimum Source Voltage	100mV
	Maximum Source Voltage	10V
	Width	87mm
	Safety Category Voltage	30V

	選取全部
	品牌 Fluke
	Product Type Current & Voltage Calibrator
	Maximum Voltage Measurement 20V
	Maximum Current Measurement 20mA
	Accuracy ± 0.01 %
	Standards/Approvals CSA C22.2 No. 1010.1:1992
	Power Source Battery
	Battery Type Alkaline
	Weight 330g
	Height 201mm
	Length 187mm
	Maximum Operating Temperature 55°C
	Hazardous Area Certification No
	Maximum Source Current 24mA
	Model Number 715
	Minimum Operating Temperature -10°C
	Minimum Source Current 4mA
	Minimum Source Voltage 100mV
	Maximum Source Voltage 10V
	Width 87mm
	Safety Category Voltage 30V

豁免

Fluke Current & Voltage Calibrator, 24mA Maximum Source Current, 10V Maximum Source Voltage - FLUKE 715

This current & voltage calibrator is a compact, battery-powered tool for calibrating and troubleshooting industrial process loops and voltage outputs. It operates across a practical temperature range and is designed for field use where portability, precision and straightforward controls are required.

Features & Benefits

• 0.01% accuracy for precise calibration and verification
• Source and measure 0mA to 20mA or 4mA to 20mA for loop work
• 24mA sourcing capability to simulate over-range conditions
• Voltage sourcing to 10V for transmitter and PLC checks
• Battery operation with removable door for quick replacement
• Safety rating to 30V for safe bench and field checks

Applications

• Suitable for commissioning 4mA to 20mA control loops
• Ideal for maintenance of transmitters and PLC outputs
• Used for field verification of loop-powered instruments
• Can be used for sourcing a 24mA fault condition during tests
• Suitable for portable checks where 0.01% accuracy is required

What power source does it use and how is it replaced?

It runs on alkaline batteries and has a removable battery door for Rapid changes in the field.

What environmental range can it be used in?

It operates between -10°C and 55°C and survives non‑operating extremes to -4°C and 60°C.

How does it support HART or resistor-requiring loops?

It provides a 24V loop supply while measuring current and can accommodate typical loop resistances when sourcing 24mA.

What are its portability characteristics for site work?

The instrument is lightweight at 330g and housed in a rugged case suitable for handheld use.

Note

Fitting replacement fuse: RS 323-6965