NCS211RMUTAG onsemi Rail to Rail Current Sensing Amplifier Single 10-Pin UQFN
- RS庫存編號:
- 186-1444
- 製造零件編號:
- NCS211RMUTAG
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 10 件）*
TWD288.00
(不含稅)
TWD302.40
(含稅)
添加 50 件 件可免費送貨
庫存資訊目前無法查詢
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 740 | TWD28.80 | TWD288.00 |
| 750 - 1490 | TWD28.00 | TWD280.00 |
| 1500 + | TWD27.60 | TWD276.00 |
* 參考價格
- RS庫存編號:
- 186-1444
- 製造零件編號:
- NCS211RMUTAG
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Power Supply Type | Single | |
| Product Type | Current Sensing Amplifier | |
| Maximum Supply Voltage | 26V | |
| Minimum Supply Voltage | 2.2V | |
| CMRR - Common Mode Rejection Ratio | 105dB | |
| Number of Channels | 1 | |
| Supply Current | 60μA | |
| Mount Type | Surface | |
| Package Type | UQFN | |
| Pin Count | 10 | |
| GBP - Gain Bandwidth Product | 25kHz | |
| Minimum Operating Temperature | -40°C | |
| Height | 0.55mm | |
| Standards/Approvals | No | |
| Length | 1.4mm | |
| Series | NCS211 | |
| Width | 1.8 mm | |
| Output Type | Rail to Rail | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | AEC-Q101 | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Power Supply Type Single | ||
Product Type Current Sensing Amplifier | ||
Maximum Supply Voltage 26V | ||
Minimum Supply Voltage 2.2V | ||
CMRR - Common Mode Rejection Ratio 105dB | ||
Number of Channels 1 | ||
Supply Current 60μA | ||
Mount Type Surface | ||
Package Type UQFN | ||
Pin Count 10 | ||
GBP - Gain Bandwidth Product 25kHz | ||
Minimum Operating Temperature -40°C | ||
Height 0.55mm | ||
Standards/Approvals No | ||
Length 1.4mm | ||
Series NCS211 | ||
Width 1.8 mm | ||
Output Type Rail to Rail | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard AEC-Q101 | ||
The NCS211R and NCV211R are voltage output, current sense amplifiers that can measure voltage across shunts at common−mode voltages from −0.3 V to 26 V, independent of supply voltage. With a fixed gain of 500 V/V, the low offset of the zero−drift architecture enables current sensing across the shunt with maximum voltage drops as low as 10 mV full−scale. These devices can operate from a single +2.2 V to +26 V power supply, drawing a maximum of 80 μA of supply current. Available in SC70-6 package Additional gain options are available: NCS213R (50 V/V), NCS214R (100 V/V) , NCS210R (200 V/V).
Wide common mode input range -0.3 V to 26 V
Low offset voltage ± 150 μV Max
Low Offset Drift: 0.5 μV/°C
Supply voltage range from 2.2 V to 26 V
High-Side Current Sensing for High Voltage Systems
Low Ohm value Current Sense Resistors
High accuracy over temperature leading to better power efficiency
Wide supply voltage range provides system flexibility
Current Sensing (High-Side/Low-Side)
Applications
Power Monitoring
Power Adapters
LED Power Supply
Over Current Protection
Automotive
Closed Loop Feedback Circuits
End Products
White Goods
Automotive
Lighting
Laptop/Notebooks PC
Fast Chargers in Smartphones and Tablets
Telecom DC-DC modules
E- Cigarettes
Computing Servers
相關連結
- onsemi Rail to Rail Current Sensing Amplifier Single 10-Pin UQFN
- Texas Instruments Voltage Current Sensing Amplifier Single 10-Pin UQFN
- onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- INA190A3IRSWT Texas Instruments Voltage Current Sensing Amplifier Single 10-Pin UQFN
- INA190A4IRSWR Texas Instruments Voltage Current Sensing Amplifier Single 10-Pin UQFN
- NCS210RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCS213RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70
- NCV210RSQT2G onsemi Rail to Rail Current Sensing Amplifier Single 6-Pin SC-70