Fluke i6000S FLEX Current Probe, 6 kA AC Max

This current probe is a flexible Rogowski-style sensor for measuring high alternating currents with portable oscilloscopes, recorders or data loggers. It provides a lightweight, adaptable measuring head for use in confined or hard-to-reach installations while supporting industrial test and diagnostic workflows.

• Measure up to 6000A ac rms for high-current systems
• High-accuracy current probe ±1% across mains frequencies
• Switchable 60A, 600A and 6000A ranges for versatile scaling
• Frequency response 10Hz–50kHz to capture harmonics and transients
• 2m cable flexible current probe for remote electronics placement
• Battery life 400h probe with 2xAA power for extended field use

• Suitable for commissioning and fault-finding on large motors and drives
• Ideal for harmonic analysis and transient capture in power systems
• Used with portable oscilloscopes for on-site waveform recording
• Can be used for load studies on industrial distribution panels
• Used for maintenance diagnostics in automation and electrical workshops

The measuring head withstands up to +90°C while the electronics operate up to +85°C, and both work down to −20°C.

It outputs via a 0.5m cable terminated with a safety BNC connector and includes a 4mm safety plug adaptor for compatibility with scopes and loggers.

External wire influence is typically 1% for currents more than 200mm from the head, and external fields with the cable routed greater than 200mm contribute about ±1% of range.

It is rated to CAT III 600V working voltage and complies with BS EN 61326 EMC requirements and relevant BS EN 61010 safety standards.

Yes, besides the supplied alkaline cells, a dedicated external power supply is available in Europe and the UK.