Souriau Sunbank by Eaton TRIM TRIO Crimp Tool Frame Crimping Tool Frame for Crimp Contact

查看所有Crimp Tools

小計（1 件）*

TWD4,423.00

(不含稅)

TWD4,644.15

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 11 件準備從其他地點送貨
  • 加上 16 件從 2026年3月24日 起發貨
  • 加上 16 件從 2026年4月07日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD4,423.00

* 參考價格

RS庫存編號:
787-9588
Distrelec 貨號:
180-44-777
製造零件編號:
SHANDLES
製造商:
Souriau Sunbank by Eaton
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Souriau Sunbank by Eaton

Product Type

Crimp Tool Frame

Sub Type

Crimping Tool Frame

For Use With

Crimp Contact

Series

TRIM TRIO

Standards/Approvals

RoHS

COO (Country of Origin):
DE

Souriau Trim Trio Crimp Contact Tooling Dies and Crimp Tool Handle


The Souriau Shandles Crimping Tool + Crimping Heads are equipment designed with a professional use in mind. Manufactured from high-quality materials that guarantee durability and long life operation. The Shandles Crimp Tool (787-9588) is a crimp tool without a die and can be used with Souriau Trim Trio contacts, including MSM-MSG -MB rectangular connectors, SMS Qikmate connectors, UTO - UTS - UTL - UTG and UTP - MBG circular connectors.

TRIM TRIO dies compatible with a crimp tool handles are:

• Souriau UTS Series, Crimping Head, Wire size 16 -14 AWG, Hex size 1.6mm (787-9557)

• Souriau UTS Series, Crimping Head, Wire size 16 -14 AWG, Hex size 1.6mm (787-9563)

• Souriau UTS Series, Crimping Head, #16 RM RC Contact (787-9566)

• Souriau UTS Series, Crimping Head, Wire size 26 - 20 AWG, Hex size 1.6mm (787-9569)

• Souriau UTS Series, Crimping Head, Wire size 18 -16 AWG, Hex size 1.6mm (787-9572)

• Souriau UTS Series, Crimping Head, Wire size 26 -18 AWG, Hex size 1.6mm (787-9575)

• Souriau UTS Series, Crimping Head, Wire size 26 - 20 AWG, Hex size 1.6mm (787-9759)

• Souriau Crimping Head, Wire size 30 - 20 AWG (851-0075)

• Souriau Crimping Head, Wire size 16 - 14 AWG (851-0079)

Features and Benefits:

• Made from highly durable materials

• The guaranteed endurance of 5000 cycles

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ’s:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Souriau UTS


相關連結