RS PRO Crimp Tool Crimp Tool for Ring Cable Lugs

683-1608 - Wire size: 0.35-2.5 mm2 / AWG 22-14, Length 198 mm

683-1601 – Wire size 4-10 mm2 / AWG 12-AWG 8

Hardened alloy steel construction

Full cycle crimp mechanism to ensure consistent, reliable crimp

Ratchet release mechanism to clear miscrimps and obstructions

Life span, cycles: 50,000

Emergency release, if the pressing operation needs to be interrupted

Compact design

Ergonomic handles

Crimping tools can be used for a variety of applications:-

Safety pressing pliers for non-insulated connections

For non-insulated cable lugs, other connectors and tubular cable lugs KR

Maintenance & repair

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants

*Use a light mineral-free oil

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.