HARTING Crimp Tool Crimp Tool for Han-Yellock Connector Contacts, Han E Connector Contacts, Han D Connector Contacts

查看所有Crimp Tools

小計（1 件）*

TWD6,703.00

(不含稅)

TWD7,038.15

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 101 件準備從其他地點送貨
  • 加上 2 件從 2026年3月30日 起發貨
  • 加上 90 件從 2026年4月13日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD6,703.00

* 參考價格

RS庫存編號:
313-6607
Distrelec 貨號:
180-48-708
製造零件編號:
09990000021
製造商:
HARTING
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

HARTING

Product Type

Crimp Tool

Sub Type

Crimp Tool

For Use With

Han-Yellock Connector Contacts, Han E Connector Contacts, Han D Connector Contacts

Overall Length

255mm

Standards/Approvals

No

COO (Country of Origin):
DE

Harting Service Crimp Tool


A service crimp tool from Harting for use with solid turned Han D, Han E, and Han-Yellock Series crimp contacts. This crimp tool offers interchangeable locators designed for this range of crimp contacts and is capable of crimping male and female contacts from 0.14 mm to 2.5 mm. A ratchet mechanism has been incorporated into the device that prevents premature opening before the completion of a crimp, ensuring consistent crimping quality.

Features and Benefits

• Designed to operate on Harting Han D, Han E and Han-Yellock series crimp contacts

• Interchangeable locator

• Ratchet Action

• Early Release Action

• Reduced hand strain

What do you get?

• Service crimp tool

• Locator Han D (supplied loose)

• Locator Han E (mounted)

• Instructions

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

FAQ:

What are the benefits of a locator?

The locator guarantees that the crimp contact is terminated in the proper position. They can be removed by unscrewing the fixing screw on the fixed jaw.

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, where-as the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

相關連結