Knipex 1.5 mm Crimp Tool Crimp Tool for Bootlace Ferrule

RS庫存編號:: 260-1554
製造零件編號:: 97 71 180
製造商:: Knipex

Knipex 1.5 mm Crimp Tool Crimp Tool for Bootlace Ferrule

小計（1 件）*

TWD1,961.00

(不含稅)

TWD2,059.05

訂單超過 $1,300.00 免費送貨

有庫存

14 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD1,961.00

* 參考價格

RS庫存編號:: 260-1554
製造零件編號:: 97 71 180
製造商:: Knipex

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Knipex
	Sub Type	Crimp Tool
	Product Type	Crimp Tool
	For Use With	Bootlace Ferrule
	Handle Type	Plastic Coated
	Cutting Capacity	1.5 mm
	Height Safe	No
	Overall Length	180mm
	Standards/Approvals	DIN 46228 parts 1 + 4
	Maximum Wire Size AWG	5
	Minimum Wire Size AWG	23

	選取全部
	品牌 Knipex
	Sub Type Crimp Tool
	Product Type Crimp Tool
	For Use With Bootlace Ferrule
	Handle Type Plastic Coated
	Cutting Capacity 1.5 mm
	Height Safe No
	Overall Length 180mm
	Standards/Approvals DIN 46228 parts 1 + 4
	Maximum Wire Size AWG 5
	Minimum Wire Size AWG 23

Datasheet

豁免

COO (Country of Origin):: DE

Crimping pliers for end sleeves 180mm - 0,25 - 16mm².

Knipex high quality crimping pliers are designed to be used wherever end sleeves or cable ferrules are crimped. This portable crimping tool is designed to crimp together pieces of material in sizes from 0.25 to 16 mm². The 9 pinned crimping dies are clearly visible and marked to ensure correct insertion of the end sleeves. After applying manual force to crimp the end caps, the cable end cap is crimped.

Features and benefits

- PVC sleeve;- For end sleeves in accordance with DIN 46228 between 0.25 and 16 mm² (AWG 23 to 5 to

- 9 crimping sections with lugs (crimping dies)

- Clear marking for safe positioning and crimping;- Special tool steel, forged, oil-hardened

Typical applications

These crimping pliers can be used to work on;- IT control systems;- Domestic electrical systems;- Electronic systems

Product maintenance

- To maintain proper operation and long life, the shafts and other moving parts should be lubricated regularly.;- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.;*Use a light non-mineral oil.