DMC Crimp Tool for Type 43 Connectors

查看所有Crimp Tools
可享批量折扣

小計（1 件）*

TWD36,399.00

(不含稅)

TWD38,218.95

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 8 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD36,399.00
5 +TWD35,306.00

* 參考價格

RS庫存編號:
185-6157
製造零件編號:
MH800 (GB109)
製造商:
DMC
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

DMC

Product Type

Crimp Tool

For Use With

Type 43 Connectors

Overall Length

190.5mm

Standards/Approvals

No

豁免

COO (Country of Origin):
US

Manufacturer's Warranty


DMC MH800 Miniature Special Purpose Crimp Tool


A miniature special purpose crimp tool specifically designed to crimp the centre contact of Type 43 (T43) coaxial connectors with a wire size range of 20 to 32 AWG (miniature to sub-miniature). The MH800 crimp tool from DMC has a lightweight design and uses interchangeable positioners for precision crimping. A fixed position locator and double ratchet action ensure that consistent crimping accuracy and precision are achieved and partial crimps are prevented. The MH800 crimp tool has tight gaging tolerances and also features an indented tip configuration that allows a uniform flow of metal during the crimping operation.

Features and Benefits

• Double action ratchet

• Fixed positioner

• Crimps the centre contact of Type 43

• Tight gaging tolerances

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Computer Interfacing

• Cable assemblies

FAQ:

How easy are they to use?

They are very easy to use, choose the male or female pin for application, insert the wire into the pin then open the crimp tool, insert into the hole of the indent crimper and squeeze until the cycle finishes.

How do you maintain the product?

This hand tool requires little maintenance. Please be advised that its good practice to keep the indenter tips free of debris. Do not lubricate with oil, this is a precision tool and should be treated as such.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

相關連結