Knipex Twistor 16 Crimp Tool for Wire Ferrules

查看所有Crimp Tools

小計（1 件）*

TWD8,098.00

(不含稅)

TWD8,502.90

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 8 件準備從其他地點送貨
  • 加上 3 件從 2026年5月11日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD8,098.00

* 參考價格

RS庫存編號:
176-4188
Distrelec 貨號:
301-16-795
製造零件編號:
97 53 18
製造商:
Knipex
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Knipex

Product Type

Crimp Tool

For Use With

Wire Ferrules

Height Safe

No

Series

Twistor 16

Overall Length

200mm

Minimum Wire Size AWG

28AWG

Maximum Wire Size mm²

16

Minimum Wire Size mm²

0.08

Maximum Wire Size AWG

6AWG

不相容

Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with 360° rotating head


The Knipex 16 Series Cable Crimper for end sleeves has a square crimp profile and high cable crimping capacity. It has a 360° rotating crimping die, with 8 tactile locking positions and has a high crimping quality. It is self-adjusting so there is no risk of crimping errors due to using the wrong crimping die or setting.

Features and Benefits


- 360° rotating crimping head with 8 engagement positions

- Square crimp profile, crimping range

- Crimping of wire end ferrules possible in almost any working position

- Crimping tool automatically adjusts to the individual sections

- Crimp opening accessible from both sides, end sleeves can be moved

- Crimping of twin end sleeves up to 2 x 6 mm² is possible

- Crimp quality is always high thanks to the forced locking (can be unlocked)

- Lightweight and handy tool, hand force reduced by lever mechanisms

- Compact design

- Ergonomic handles

- Slim head for ideal accessibility

- Capacities mm² / AWG : from 0.14 to 16 mm², AWG from 28 to 5

- Material: special grade chrome vanadium electric steel, oil-hardened

Typical applications


Crimping pliers can be used in many applications:

- Maintenance and repair

- Electrical installations

- Crimp shop

Product Maintenance


- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil

相關連結