RS PRO Crimp Tool Crimp Tool for Crimp Contacts
- RS庫存編號:
- 531-403
- Distrelec 貨號:
- 304-04-324
- 製造商:
- RS PRO
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 件）*
TWD8,570.00
(不含稅)
TWD8,998.50
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 49 件從 2026年3月02日 起發貨
- 加上 15 件從 2026年3月26日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD8,570.00 |
* 參考價格
- RS庫存編號:
- 531-403
- Distrelec 貨號:
- 304-04-324
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Sub Type | Crimp Tool | |
| Product Type | Crimp Tool | |
| For Use With | Crimp Contacts | |
| Height Safe | No | |
| Overall Length | 190mm | |
| Adjustable Ratchet | No | |
| Standards/Approvals | MIL-C-22520/2 | |
| Maximum Wire Size AWG | 16 | |
| Maximum Wire Size mm² | 1.29 | |
| Minimum Wire Size AWG | 26 | |
| Minimum Wire Size mm² | 0.4 | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Sub Type Crimp Tool | ||
Product Type Crimp Tool | ||
For Use With Crimp Contacts | ||
Height Safe No | ||
Overall Length 190mm | ||
Adjustable Ratchet No | ||
Standards/Approvals MIL-C-22520/2 | ||
Maximum Wire Size AWG 16 | ||
Maximum Wire Size mm² 1.29 | ||
Minimum Wire Size AWG 26 | ||
Minimum Wire Size mm² 0.4 | ||
豁免
- COO (Country of Origin):
- GB
RS PRO Indent Crimp Tool
RS PRO 8-indent crimp tool designed around MIL-C-2250/2 (setting 3 upwards). Lightweight and easy to operate, the positioners set the crimp contact barrel at the correct height for crimping. This professional hand tool offers wire range size of 26 AWG to 16 AWG.
Features and Benefits:
Tool: nickel plated steel finish
Blue plastic handle grip
Positioners are anodised and fixed to the tool using a bayonet action
Width: 40 mm
Wire size: 26 to 16 AWG
Typical Applications
Crimping tools can be used for a variety of applications:-
• Maintenance & repair
• Electrical Installations
• Cable assemblies
FAQs:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How to maintain the product?
• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to dirt or other contaminants
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
*Use a light mineral-free oil
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical
相關連結
- RS PRO Crimp Tool Crimp Tool for Crimp Contacts
- RS PRO V9011 Crimp Tool Crimp Tool for Crimp Contacts
- RS PRO PZ4 Crimp Tool Crimp Tool for Crimp Contacts
- RS PRO TRIM TRIO Crimp Tool Crimp Tool for QM Contacts
- RS PRO TL Crimp Tool for Crimp Contacts
- RS PRO Crimp Tool Open Barrel for Crimp Contacts
- JST YC Crimp Tool Crimp Tool for SPA Contacts SPHD Contacts
- TE Connectivity Pro-Crimper III Crimp Tool Crimp Tool for CST 100 Connector Contacts