Deutsch DT Crimp Tool Crimp Tool for DT Solid Contacts

查看所有Crimp Tools

小計（1 件）*

TWD15,866.00

(不含稅)

TWD16,659.30

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 6 件準備從其他地點送貨
  • 加上 170 件從 2026年4月17日 起發貨
  • 加上 36 件從 2026年4月24日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD15,866.00

* 參考價格

RS庫存編號:
425-973
Distrelec 貨號:
303-07-106
製造零件編號:
HDT-48-00
製造商:
Deutsch
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Deutsch

Sub Type

Crimp Tool

Product Type

Crimp Tool

For Use With

DT Solid Contacts

Handle Type

Universal

Series

DT

Overall Length

264mm

Standards/Approvals

RoHS

Minimum Wire Size AWG

16

COO (Country of Origin):
US

Universal Crimp Tool for Deutsch Connectors


Deutsch HDT-48-00 is universal crimp tool designed to crimp Deutsch contacts to appropriate wiring for insertion into Deutsch heavy-duty connectors. It has an eight-indent crimp designed to be used with solid contacts sizes 12, 16 and 20. Used with both pin and socket contacts, the crimp tool features a simple screw adjustment for height/contact size, and a dial to select applicable wire sizes. This universal hand crimp tool is compatible with connector ranges DT, HD10, HDP20 and HD30.

Features and Benefits:

• Adjusting screw includes a jam nut

• Compatible with a wide range of Deutsch connector crimps

• Lightweight and comfortable to use

Typical Applications:

• Maintenance & repair

• Electrical Installations

• Cable assemblies

• Automotive industry

FAQ's:

What is the difference between un-insulated and insulated crimp tools?

Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?

• Axles and other movable parts should be regularly lubricated.

• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants

• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

HDT-48 Crimp Tool


相關連結