可享批量折扣
小計（1 件）*
TWD2,703.00
(不含稅)
TWD2,838.15
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 5 | TWD2,703.00 |
| 6 - 11 | TWD2,594.00 |
| 12 + | TWD2,487.00 |
* 參考價格
- RS庫存編號:
- 325-8094
- 製造零件編號:
- MWC25-8-8-SS
- 製造商:
- Ruland
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Ruland | |
| Product Type | Coupler | |
| Outside Diameter | 25 mm | |
| Length | 30mm | |
| Maximum Speed | 6000rpm | |
| Torque Rating | 3.42Nm | |
| Misalignment - Angular | 3° | |
| Number of Beams | 4 | |
| Style | Clamp | |
| Misalignment - Parallel | 0.38mm | |
| Misalignment - Axial | 0.25mm | |
| Bore Size A | 8mm | |
| Material | Stainless Steel | |
| Minimum Operating Temperature | -40°C | |
| Bore Size B | 8mm | |
| Series | MW | |
| Maximum Operating Temperature | 176°C | |
| Standards/Approvals | RoHS3, REACH, DIN 912 12.9 | |
| Screw Size | M4 | |
| 選取全部 | ||
|---|---|---|
品牌 Ruland | ||
Product Type Coupler | ||
Outside Diameter 25 mm | ||
Length 30mm | ||
Maximum Speed 6000rpm | ||
Torque Rating 3.42Nm | ||
Misalignment - Angular 3° | ||
Number of Beams 4 | ||
Style Clamp | ||
Misalignment - Parallel 0.38mm | ||
Misalignment - Axial 0.25mm | ||
Bore Size A 8mm | ||
Material Stainless Steel | ||
Minimum Operating Temperature -40°C | ||
Bore Size B 8mm | ||
Series MW | ||
Maximum Operating Temperature 176°C | ||
Standards/Approvals RoHS3, REACH, DIN 912 12.9 | ||
Screw Size M4 | ||
- COO (Country of Origin):
- US
Stainless Steel Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.Two fixing styles available:,Typical applications include encoders, stepper motors, robotics, measuring instruments, servo systems, pumps, valves, fans etc., (i) Set Screw style is secured using one grub-screw per shaft (staggered at 120°) , (ii) Clamp style fixing uses one socket head cap screw per shaft.
Constant velocity couplings with high torque capacity and zero backlash
Torsionally rigid one-piece construction
Not temperature sensitive
High or low speed operation and reversible
No lubrication required
Up to 3° of axial misalignment allowable
Note
The coupling shown represents the clamp style fixing
相關連結
- Ruland 30 mm Length 10 mm Coupler
- Ruland 30 mm Length 7 mm Flexible Coupling
- Ruland 30 mm Length 8 mm Flexible Coupling
- Ruland 30 mm Length 8 mm Flexible Coupling
- Ruland 30 mm Length 6 mm Flexible Coupling
- Ruland 24 mm Length 6 mm Coupler
- Ruland 24 mm Length 8 mm Coupler
- Ruland 30 mm Length 8 mm Flexible Coupling