Kubler K 07.90 Counter, Counter, 7 Digit, 25 Hz 24V dc
- RS庫存編號:
- 297-3045
- 製造零件編號:
- 1.130.900.033
- 製造商:
- Kubler
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD926.00
(不含稅)
TWD972.30
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD926.00 |
| 5 - 9 | TWD890.00 |
| 10 + | TWD853.00 |
* 參考價格
- RS庫存編號:
- 297-3045
- 製造零件編號:
- 1.130.900.033
- 製造商:
- Kubler
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Kubler | |
| Product Type | Counter | |
| Function | Counter | |
| Connection Type | Solder Pin | |
| Reset Method | No Reset | |
| Direction of Rotation | Up | |
| Number of Digits | 7 | |
| Mount Type | PCB | |
| Count Direction | Up | |
| Maximum Supply Voltage | 24V dc | |
| Digit Height | 4mm | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Weight | 18g | |
| Maximum Count Frequency | 25Hz | |
| Standards/Approvals | No | |
| Depth | 32.7mm | |
| Cutout Height | 13mm | |
| Cutout Width | 30mm | |
| Meter Type | Electromechanical | |
| Series | K 07.90 | |
| 選取全部 | ||
|---|---|---|
品牌 Kubler | ||
Product Type Counter | ||
Function Counter | ||
Connection Type Solder Pin | ||
Reset Method No Reset | ||
Direction of Rotation Up | ||
Number of Digits 7 | ||
Mount Type PCB | ||
Count Direction Up | ||
Maximum Supply Voltage 24V dc | ||
Digit Height 4mm | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Weight 18g | ||
Maximum Count Frequency 25Hz | ||
Standards/Approvals No | ||
Depth 32.7mm | ||
Cutout Height 13mm | ||
Cutout Width 30mm | ||
Meter Type Electromechanical | ||
Series K 07.90 | ||
- COO (Country of Origin):
- DE
Non Reset Totalising Counters
Magnifying lens increases readout to 4mm
Retains count during power failure
Unaffected by shock, vibration or magnetic fields
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
相關連結
- Kubler K 07.90 Counter 7 Digit, 10 Hz 12V dc
- Kubler K 67.20 Counter 7 Digit Analogue, 10 Hz 24V dc
- Kubler K 47.20 Counter 7 Digit Analogue, 10 Hz 24V dc
- Kubler K 07.20 Counter 7 Digit, 25 Hz 230V
- Kubler K07 Counter 7 Digit, 10 Hz 24V dc
- Kubler AK07.00 Counter 7 Digit, 25 Hz 24V dc
- Kubler K 07.20 Counter 7 Digit, 10 Hz 115V ac
- Kubler K 47.20 Counter 7 Digit Analogue, 10 Hz 5V