Kubler SK 07.1 Counter, Counter, 7 Digit Analogue, 10 Hz 12V dc
- RS庫存編號:
- 202-1166
- 製造零件編號:
- 1.132.101.012
- 製造商:
- Kubler
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD1,436.00
(不含稅)
TWD1,507.80
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD1,436.00 |
| 5 - 9 | TWD1,379.00 |
| 10 + | TWD1,322.00 |
* 參考價格
- RS庫存編號:
- 202-1166
- 製造零件編號:
- 1.132.101.012
- 製造商:
- Kubler
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Kubler | |
| Product Type | Counter | |
| Count Mode | Impulse | |
| Display Type | Analogue | |
| Function | Counter | |
| Connection Type | Clamp | |
| Reset Method | No Reset | |
| Direction of Rotation | Up | |
| Number of Digits | 7 | |
| Mount Type | DIN Rail | |
| Maximum Supply Voltage | 12V dc | |
| Count Direction | Up | |
| Minimum Operating Temperature | -10°C | |
| Digit Height | 4mm | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Weight | 55g | |
| Depth | 58mm | |
| Maximum Count Frequency | 10Hz | |
| Meter Type | Electromechanical | |
| Series | SK 07.1 | |
| 選取全部 | ||
|---|---|---|
品牌 Kubler | ||
Product Type Counter | ||
Count Mode Impulse | ||
Display Type Analogue | ||
Function Counter | ||
Connection Type Clamp | ||
Reset Method No Reset | ||
Direction of Rotation Up | ||
Number of Digits 7 | ||
Mount Type DIN Rail | ||
Maximum Supply Voltage 12V dc | ||
Count Direction Up | ||
Minimum Operating Temperature -10°C | ||
Digit Height 4mm | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Weight 55g | ||
Depth 58mm | ||
Maximum Count Frequency 10Hz | ||
Meter Type Electromechanical | ||
Series SK 07.1 | ||
Two Module Wide Counter SK07
Compact adding counter for DIN rail mounting to DIN 46277
Highly shock proof - IP50 front panel
Data retention at power failure
Long life time (50 million counts)
PCB, Surface & DIN Rail Mounting
All units are non-resettable and are continuously rated,Counters may be damaged if connected to inductive loads where high voltage transients may be present. Should this be unavoidable, use a suitable suppression circuit (refer to the Capacitors section) connected across the count or reset coil terminals.,Count rate of all products is 10Hz.
相關連結
- Kubler SK 07.1 Counter 7 Digit Analogue, 10 Hz 230V ac
- Kubler SK 07.1 Counter 7 Digit Analogue, 10 Hz 115V ac
- Kubler SK 07.1 Counter 7 Digit Analogue, 25 Hz 24V dc
- Kubler SHK 07.1 Counter 7 Digit Analogue 264V ac
- Kubler SHK 07.1 Hour Meter 7 Digit Analogue 35V dc
- Kubler SHK 07.1 Hour Meter 7 Digit Analogue 130V ac
- Kubler W15.51 Counter 5 Digit Analogue, 10 Hz 12V dc
- Kubler W17.50 Counter 7 Digit Analogue, 10 Hz 12V dc