暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 445-9872
- 製造零件編號:
- LL-23S
- 製造商:
- PMA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | PMA | |
| Product Type | Conduit | |
| Nominal Diameter | 25mm | |
| Material | Plastic | |
| Series | LL | |
| Colour | Grey | |
| Length | 10m | |
| IP Rating | IP66, IP68, IP54 | |
| Thread Size | M25 | |
| Minimum Operating Temperature | -20°C | |
| Resistance Features | Acid Resistant | |
| Maximum Operating Temperature | 90°C | |
| Standards/Approvals | EU, UL | |
| Hazardous Area Certification | ATEX | |
| Minimum Bend Radius | 45mm | |
| 選取全部 | ||
|---|---|---|
品牌 PMA | ||
Product Type Conduit | ||
Nominal Diameter 25mm | ||
Material Plastic | ||
Series LL | ||
Colour Grey | ||
Length 10m | ||
IP Rating IP66, IP68, IP54 | ||
Thread Size M25 | ||
Minimum Operating Temperature -20°C | ||
Resistance Features Acid Resistant | ||
Maximum Operating Temperature 90°C | ||
Standards/Approvals EU, UL | ||
Hazardous Area Certification ATEX | ||
Minimum Bend Radius 45mm | ||
- COO (Country of Origin):
- CH
ABB Series LL Conduit, 25mm Nominal Diameter, Grey - LL-23S
This conduit is a flexible, light‑wall polypropylene conduit designed to protect electrical cabling in industrial and machine‑building environments. It offers chemical resistance and suitability for use where reduced weight and flexibility are required, while providing protection against ingress and hazardous‑area conditions.
Features & Benefits
• Operates across a −20°C to 90°C temperature range for varied environments
• Withstands repeated flexing for long service life under movement
• Acid‑resistant material reduces corrosion risk from aggressive media
• Compatible with M25 threaded fittings for secure terminations
• Low density yields easy handling and simplifies installation
• Withstands repeated flexing for long service life under movement
• Acid‑resistant material reduces corrosion risk from aggressive media
• Compatible with M25 threaded fittings for secure terminations
• Low density yields easy handling and simplifies installation
**Applications**
• Suitable for cable routing in machine building and apparatus construction
• Ideal for flexible installations in automation systems requiring tight bends
• Used for protecting wiring in hazardous areas with explosion‑protection needs
• Can be used with modular conduit accessories and connector systems
• Ideal for flexible installations in automation systems requiring tight bends
• Used for protecting wiring in hazardous areas with explosion‑protection needs
• Can be used with modular conduit accessories and connector systems
What material properties enable chemical resistance?
The conduit is MADE from specially modified polypropylene with a density around 0.90–0.92 g/cm3, providing resistance to strong acids and a halogen‑free composition.
How does the product perform under mechanical stress?
Impact strength exceeds 3 J and Peak load values are greater than 150 N for 50mm samples and greater than 300 N for 100mm samples, while reversed bending endurance is over 100,000 cycles.
What mounting or assembly advantages does it offer?
The light‑wall construction allows pre‑assembly and straightforward installation with compatible connector systems, reducing handling time on site.
Which approvals and protection classes apply to its usage?
It meets EU and UL approvals and is certified for hazardous‑area installation with multiple ingress ratings to suit different environmental demands.
How should static installations be configured regarding bend radius?
The lowest recommended bending radius for fixed installation is 45mm to preserve conduit integrity and cable performance.