FTDI Chip VNC2 Vinculum Module VNC2-48Q Development Kit for V2DIP1-48 Module V2DIP1-48

查看此類別
可享批量折扣

小計（1 件）*

TWD862.00

(不含稅)

TWD905.10

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 從 2026年10月05日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 - 4TWD862.00
5 - 9TWD855.00
10 +TWD848.00

* 參考價格

RS庫存編號:
708-0097
製造零件編號:
V2DIP1-48
製造商:
FTDI Chip
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

FTDI Chip

Product Type

Communication & Wireless Development Tool

Kit Classification

Development Kit

Technology

Vinculum-II VNC2 Embedded dual USB host controller

For Use With

V2DIP1-48 Module

Featured Device

VNC2-48Q

Kit Name

VNC2 Vinculum Module

Interface Type

USB, SPI, UART

Standards/Approvals

Pb-Free, RoHS

COO (Country of Origin):
CN

Vinculum VNC2 Development Modules


The VNC2 is the second of FTDI’s Vinculum family of Embedded dual USB host controller devices. The VNC2 device provides USB Host interfacing capability for a variety of different USB device classes including support for BOMS (bulk only mass storage), Printer, HID (human interface devices). For mass storage devices such as USB Flash drives, VNC2 also transparently handles the FAT file structure. Communication with non USB devices such as a low cost microcontroller is accomplished via either UART, SPI or parallel FIFO interfaces. The VNC2 provides a new cost effective solution for providing USB Host capability into products that previously did not have the hardware resources available. The VNC2 supports the capability to enable customers to develop custom firmware using the Vinculum II development software tool suite. The development tools support compiler, linker and debugger tools complete within an integrated development environment (IDE). The Vinculum-II VNC2 family of devices are available in 32-lead LQFP, 32-lead QFN, 48-lead LQFP, 48-lead QFN, 64-Lead lQFP and 64-lead QFN packages.

USB ’A’ type USB socket to interface with USB peripheral devices

Second USB interface port accessible via module pins if required

UART, parallel FIFO and SPI interfaces can be programmed to a choice of available I/O pins

Single +5V supply input from DIL connectors or +5V supplied via USB VBUS slave interface or debugger module

Auxiliary +3.3V @ 200mA power output to external logic

Debugger interface pin available on DIL pins or via 6 way male header which interfaces to separate debugger module

Firmware upgrades via UART or debugger interface pin header

Note

Software downloaded from www.ftdichip.com/Firware/VNC2tools.htm"

相關連結