TSL25911FN ams OSRAM Ambient Light Sensor 850 nm ODFN 6
- RS庫存編號:
- 232-9763
- 製造零件編號:
- TSL25911FN
- 製造商:
- ams OSRAM
此圖片僅供參考,請參閲產品詳細資訊及規格
可享批量折扣
小計(1 包,共 5 件)*
TWD239.00
(不含稅)
TWD250.95
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 355 個,準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 95 | TWD47.80 | TWD239.00 |
| 100 - 495 | TWD46.80 | TWD234.00 |
| 500 - 995 | TWD45.20 | TWD226.00 |
| 1000 - 2495 | TWD44.20 | TWD221.00 |
| 2500 + | TWD43.20 | TWD216.00 |
* 參考價格
- RS庫存編號:
- 232-9763
- 製造零件編號:
- TSL25911FN
- 製造商:
- ams OSRAM
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ams OSRAM | |
| Product Type | Ambient Light Sensor | |
| Typical Rise Time | 300ns | |
| Typical Fall Time | 300ns | |
| Mount Type | Surface | |
| Package Type | ODFN | |
| Minimum Supply Voltage | 2.7V | |
| Maximum Wavelength Detected | 850nm | |
| Maximum Supply Voltage | 3.6V | |
| Application | Commercial | |
| Output Signal Type | I2C | |
| Number of Pins | 6 | |
| Minimum Operating Temperature | -40°C | |
| Series | TSL | |
| Height | 650μm | |
| Length | 2mm | |
| Standards/Approvals | No | |
| Width | 2.4mm | |
| Maximum Operating Temperature | 85°C | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 ams OSRAM | ||
Product Type Ambient Light Sensor | ||
Typical Rise Time 300ns | ||
Typical Fall Time 300ns | ||
Mount Type Surface | ||
Package Type ODFN | ||
Minimum Supply Voltage 2.7V | ||
Maximum Wavelength Detected 850nm | ||
Maximum Supply Voltage 3.6V | ||
Application Commercial | ||
Output Signal Type I2C | ||
Number of Pins 6 | ||
Minimum Operating Temperature -40°C | ||
Series TSL | ||
Height 650μm | ||
Length 2mm | ||
Standards/Approvals No | ||
Width 2.4mm | ||
Maximum Operating Temperature 85°C | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TH
The ams TSL2591 series is a very high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I2C interface. The device combines one broadband photodiode and one infrared-responding photodiode on a single CMOS integrated circuit. Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance in lux is derived using an empirical formula to approximate the human eye response. It supports a traditional level style interrupt that remains asserted until the firmware clears it.
Design flexibility for dark glass and placement
Enables operation in IR light environments
Enables dark room to sunlight operation
Reduces microprocessor interrupt overhead
Improves lux accuracy across various light sources
相關連結
- ams OSRAM Ambient Light Sensor 850 nm ODFN 6
- ams OSRAM Ambient Light Sensor Unit 850 nm CSP 6
- TSL2584TSV ams OSRAM Ambient Light Sensor Unit 850 nm CSP 6
- Broadcom Ambient Light Sensor Ambient Light 550 nm 8-Pin ODFN
- ams OSRAM Ambient Light Sensor Ambient Light Sensor 600 nm Analogue 2-Pin
- ams OSRAM Ambient Light Sensor 1100 nm QFN 10
- APDS-9251-001 Broadcom Ambient Light Sensor Ambient Light 550 nm 8-Pin ODFN
- SFH 5701 A01 ams OSRAM Ambient Light Sensor Ambient Light Sensor 600 nm Analogue 2-Pin
