ITT Cannon, TNMSize 24 Straight Circular Connector Backshell Strain Relief, For Use With Connector
- RS庫存編號:
- 167-9758
- 製造零件編號:
- TNA24CC-HC00L / 192900-0498
- 製造商:
- ITT Cannon
可享批量折扣
小計(1 件)*
TWD809.00
(不含稅)
TWD849.45
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 40 件從 2026年2月23日 起發貨
- 加上 100 件從 2026年3月02日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 19 | TWD809.00 |
| 20 - 39 | TWD777.00 |
| 40 + | TWD745.00 |
* 參考價格
- RS庫存編號:
- 167-9758
- 製造零件編號:
- TNA24CC-HC00L / 192900-0498
- 製造商:
- ITT Cannon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ITT Cannon | |
| Product Type | Circular Connector Backshell | |
| For Use With | Connector | |
| Shell Size | 24 | |
| Orientation | Straight | |
| Gender | Female | |
| Housing Material | Thermoplastic | |
| Colour | Black | |
| Length | 128.5mm | |
| IP Rating | IP67 | |
| Strain Relief | Yes | |
| Series | TNM | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 ITT Cannon | ||
Product Type Circular Connector Backshell | ||
For Use With Connector | ||
Shell Size 24 | ||
Orientation Straight | ||
Gender Female | ||
Housing Material Thermoplastic | ||
Colour Black | ||
Length 128.5mm | ||
IP Rating IP67 | ||
Strain Relief Yes | ||
Series TNM | ||
Standards/Approvals No | ||
- COO (Country of Origin):
- HU

ITT Cannon Backshell
The ITT Cannon Trident Neptune series backshell is a circular connector with 24 shell size, membrane wire seal equipment. The connector body is made from black nylon material with nickel-plated copper alloy coupling ring and stainless steel bayonet pins. It accepts various combinations of signal (13A) and power (30A) contacts.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal, which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Features and Benefits
Durability of 500 mating cycles
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
相關連結
- ITT Cannon For Use With Connector
- ITT Cannon For Use With Connector
- ITT Cannon For Use With Connector
- ITT Cannon For Use With Connector
- ITT Cannon For Use With Neptune Circular Connector, TNM
- ITT Cannon For Use With Jacketed Cable
- ITT Cannon Black Sealed Cable Clamp, Shell Size 10 mm for use with Trident connectors
- ITT Cannon Thermoplastic Straight D-Sub Backshell Strain Relief
