SEGGER Flasher Portable PLUS, Development Kit for FLASH microcontrollers
- RS庫存編號:
- 136-7686
- 製造零件編號:
- 5.16.02
- 製造商:
- SEGGER
可享批量折扣
小計(1 件)*
TWD41,344.00
(不含稅)
TWD43,411.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 3 件從 2025年12月08日 起發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD41,344.00 |
| 5 + | TWD40,517.00 |
* 參考價格
- RS庫存編號:
- 136-7686
- 製造零件編號:
- 5.16.02
- 製造商:
- SEGGER
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SEGGER | |
| Accessory Type | Development Kit | |
| For Use With | FLASH microcontrollers | |
| Programmer Name | Flasher Portable PLUS | |
| 選取全部 | ||
|---|---|---|
品牌 SEGGER | ||
Accessory Type Development Kit | ||
For Use With FLASH microcontrollers | ||
Programmer Name Flasher Portable PLUS | ||
Flasher Portable PLUS Programmer
Flasher Portable PLUS has been designed to fill the need for a portable, battery-operated production-grade Flash memory programmer used for in-field firmware updates. Initial setup/preparation for stand-alone mode operation is done via the J-Flash software. It supports storage of multiple configurations/image files, so one unit can be used for different targets. The Flasher Portable PLUS represents a significant upgrade to its predecessor, the Flasher Portable.
Supported Processors
• ARM 7/9/11
• ARM Cortex-A5/A7/A8/A9/A12/A15/A17
• ARM Cortex-M0/M0+/M1/M3/M4/M7
• ARM Cortex-R4/R5
• Freescale e200z0 (PowerPC)
• Renesas RX610/RX621/RX62G/RX62N/RX62T/RX630/RX631/RX63N/RX63T
Features
• Stand-alone in-circuit-programmer
• Powered by 680mAh rechargeable Li-Ion battery or USB
• Up to 10 hours programming with one battery charge
• Stores up to eight configurations/data files
• 1.8in LCD panel for display of programming status
• Pushbutton selects between stored images/configurations
• 128MB memory for configuration and data file storage
• Supports internal and external Flash devices
• Data files can be updated via mass storage or via J-Flash
• Host interface: USB 2.0
• Target interfaces: 20-pin JTAG/SWD/FINE/SPD
• Programming speed typically between 30KB/sec and 1MB/sec
• Max programming speed depends on target hardware and max programming speed of the Flash memory
• Authorized Flashing limits number of programming cycles and protects against non-authorized access
• Dimensions: 126 x 70 x 28mm
• Free software updates, 1 year of support
Supplied with
20-pin 0.1in target ribbon cable, USB cable
相關連結
- SEGGER 8.06.22 STM8-Adapter Adapter for use with Flasher ATE Flasher PRO
- SEGGER Flasher Pro
- SEGGER Flasher ARM Programmer
- Microchip Atmel-ICEAVR Microcontrollers
- SEGGER 8.06.06 J-Link TI-CTI-20 Adapter Adapter for use with J-Link/J-Trace/Flasher 20-pin 0.1 in Target Connector, TI
- SEGGER J-Link PLUS Emulator
- SEGGER 8.06.24 SEGGER SiFive-ARTY Adapter Adapter for use with ARTY
- Seeit TOP201 EPROM STC Microcontrollers
