RS PRO 50VA 1 Output Chassis Mounting Transformer, 12V ac, IEC 61558-2-6

RS庫存編號:: 504-290
製造商:: RS PRO

RS PRO 50VA 1 Output Chassis Mounting Transformer, 12V ac, IEC 61558-2-6

可享批量折扣

小計（1 件）*

TWD2,953.00

(不含稅)

TWD3,100.65

訂單超過 $1,300.00 免費送貨

有庫存

加上 3 件從 2026年2月02日起發貨
加上 50 件從 2026年2月27日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 9	TWD2,953.00
10 - 49	TWD2,836.00
50 +	TWD2,334.00

* 參考價格

RS庫存編號:: 504-290
製造商:: RS PRO

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	RS PRO
	Primary Voltage Rating	230 V ac, 245 V ac, 400 V ac, 415V ac
	Secondary Voltage Rating	12V ac
	Power Rating	50VA
	Number of Outputs	1
	Mounting Type	Panel
	Primary Winding Resistance	27/48Ω
	Efficiency	84%
	Length	84mm
	Width	84mm
	Depth	91mm
	Dimensions	84 x 84 x 91mm
	Fixing Hole Diameter	4.5mm
	Weight	1.9kg
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Standards Met	IEC 61558-2-6
	Minimum Temperature	-30°C
	Maximum Temperature	(Ambient) 70°C

	選取全部
	品牌 RS PRO
	Primary Voltage Rating 230 V ac, 245 V ac, 400 V ac, 415V ac
	Secondary Voltage Rating 12V ac
	Power Rating 50VA
	Number of Outputs 1
	Mounting Type Panel
	Primary Winding Resistance 27/48Ω
	Efficiency 84%
	Length 84mm
	Width 84mm
	Depth 91mm
	Dimensions 84 x 84 x 91mm
	Fixing Hole Diameter 4.5mm
	Weight 1.9kg
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Standards Met IEC 61558-2-6
	Minimum Temperature -30°C
	Maximum Temperature (Ambient) 70°C

COO (Country of Origin):: PL

RS PRO Panel Isolation Transformer, Primary voltage 230, 245, 400, 415 V ac, Secondary voltage ±12 V ac

It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications we developed to support various applications, such as electromagnetic, relays, pumps or heating elements.

The functionality of the Isolation Transformer has a concept to provide galvanic isolation between the AC power lines (mains) and the connected device, meaning no a DC can cross between the windings.

Today, we are proudly introducing our own branded RS PRO Isolation Transformer with a screw connector for multiple input and brackets for screw fixation. The exceptional isolating property and safety of our Transformer provide step up or step down of line (mains) voltages while reducing the noise coming from the primary to secondary or opposite.

The Isolation Transformers supports different types of equipment, from testing power-related devices to medical isolation equipment. However, they must meet rigorous electrical requirements to make sure no leakage current is in place.

Features and Benefits

100% electrical and flash tested following BS EN 61558-1 regulations

Our Transformer provides high-quality safety and isolating properties for use in control circuits and general applications

Exceptional low loss noise laminations characterising our Isolation Transformer

Thanks to the dual standard primary winding 230/400 V ac with +15 V tap creates input flexibility to your equipment

The Transformer has an earth terminal provided whereas the dual secondaries are centre tapped

The Isolation Transformer has reliable protection against humidity and rusting thanks to varnish impregnation

The Transformer is fully shrouded cage clamp terminal with the voltage markings

All the crucial technical information is available on the permanent label attached

The Isolation Transformer provides high efficiency with a low regulation design

Applications

The Transformer with isolating properties has an association with the following applications:

Medical industry

Testing power devices

where transfer power between two circuits is mandatory

Why RS PRO?

RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.