RS PRO 1 Output 300 VA Chassis Mount Transformer, 24 V ac, IEC 61558-2-4

RS庫存編號:: 504-145
Distrelec 貨號:: 304-03-122
製造商:: RS PRO

RS PRO 1 Output 300 VA Chassis Mount Transformer, 24 V ac, IEC 61558-2-4

此圖片僅供參考，請參閲產品詳細資訊及規格

可享批量折扣

小計（1 件）*

TWD6,600.00

(不含稅)

TWD6,930.00

訂單超過 $1,300.00 免費送貨

有庫存

39 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 - 9	TWD6,600.00
10 - 49	TWD6,402.00
50 +	TWD6,177.00

* 參考價格

RS庫存編號:: 504-145
Distrelec 貨號:: 304-03-122
製造商:: RS PRO

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	RS PRO
	Primary Voltage	415 V ac
	Product Type	Chassis Mount Transformer
	Secondary Voltage	24 V ac
	Number of Outputs	1
	Power	300VA
	Minimum Operating Temperature	-30°C
	Fixing Hole Diameter	6.5mm
	Winding Type	Dual Primary, Dual Secondary
	Maximum Operating Temperature	70°C
	Weight	6.9kg
	Length	120mm
	Depth	130mm
	Width	143 mm
	Minimum Operating Frequency	50Hz
	Maximum Operating Frequency	60Hz
	Standards/Approvals	IEC 61558-2-4

	選取全部
	品牌 RS PRO
	Primary Voltage 415 V ac
	Product Type Chassis Mount Transformer
	Secondary Voltage 24 V ac
	Number of Outputs 1
	Power 300VA
	Minimum Operating Temperature -30°C
	Fixing Hole Diameter 6.5mm
	Winding Type Dual Primary, Dual Secondary
	Maximum Operating Temperature 70°C
	Weight 6.9kg
	Length 120mm
	Depth 130mm
	Width 143 mm
	Minimum Operating Frequency 50Hz
	Maximum Operating Frequency 60Hz
	Standards/Approvals IEC 61558-2-4

登入下載 CAD 模型

COO (Country of Origin):: PL

RS PRO Panel Isolation Transformer, Primary voltage 230, 245, 400, 415 V ac, Secondary voltage ± 24 V ac

It has been over 100 years since the introduction of the first commercial Transformer when the mass production began. Since then, many additional modifications we developed to support various applications, such as electromagnetic, relays, pumps or heating elements.

The functionality of the Isolation Transformer has a concept to provide galvanic isolation between the AC power lines (mains) and the connected device, meaning no a DC can cross between the windings.

Today, we are proudly introducing our own branded RS PRO Isolation Transformer with a screw connector for multiple input and brackets for screw fixation. The exceptional isolating property and safety of our Transformer provide step up or step down of line (mains) voltages while reducing the noise coming from the primary to secondary or opposite.

The Isolation Transformers supports different types of equipment, from testing power-related devices to medical isolation equipment. However, they must meet rigorous electrical requirements to make sure no leakage current is in place.

Features and Benefits

100% electrical and flash tested following BS EN 61558-1 regulations

Our Transformer provides high-quality safety and isolating properties for use in control circuits and general applications

Exceptional low loss noise laminations characterising our Isolation Transformer

Thanks to the dual standard primary winding 230/400 V ac with +15 V tap creates input flexibility to your equipment

The Transformer has an earth terminal provided whereas the dual secondaries are centre tapped

The Isolation Transformer has reliable protection against humidity and rusting thanks to varnish impregnation

The Transformer is fully shrouded cage clamp terminal with the voltage markings

All the crucial technical information is available on the permanent label attached

The Isolation Transformer provides high efficiency with a low regulation design

Applications

The Transformer with isolating properties has an association with the following applications:

Medical industry

Testing power devices

where transfer power between two circuits is mandatory

Why RS PRO?

RS PRO is our own-brand range of great-value products. Each part of every RS PRO product is stringently tested against demanding industry standards. We give it our seal of approval only when we're confident of exceptional quality. That's why RS PRO is trusted by engineers worldwide.