Infineon TLT9255WLCXUMA1, CAN Transceiver 5 Mbps, 14-Pin TSON
- RS庫存編號:
- 258-1711
- 製造零件編號:
- TLT9255WLCXUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD138.00
(不含稅)
TWD144.90
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 5,000 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 8 | TWD69.00 | TWD138.00 |
| 10 - 98 | TWD62.00 | TWD124.00 |
| 100 - 248 | TWD58.50 | TWD117.00 |
| 250 - 498 | TWD51.00 | TWD102.00 |
| 500 + | TWD50.00 | TWD100.00 |
* 參考價格
- RS庫存編號:
- 258-1711
- 製造零件編號:
- TLT9255WLCXUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 5Mbps | |
| Sub Type | Interface IC | |
| Power Down Mode | High Speed | |
| Supply Current | 35mA | |
| Mount Type | Surface | |
| Package Type | TSON | |
| Interface Type | CAN | |
| Pin Count | 14 | |
| Minimum Supply Voltage | 4.75V | |
| Maximum Supply Voltage | 40V | |
| ESD Protection | Yes | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Height | 1mm | |
| Width | 3 mm | |
| Length | 4.5mm | |
| Standards/Approvals | ISO 11898-2, RoHS | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 5Mbps | ||
Sub Type Interface IC | ||
Power Down Mode High Speed | ||
Supply Current 35mA | ||
Mount Type Surface | ||
Package Type TSON | ||
Interface Type CAN | ||
Pin Count 14 | ||
Minimum Supply Voltage 4.75V | ||
Maximum Supply Voltage 40V | ||
ESD Protection Yes | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Height 1mm | ||
Width 3 mm | ||
Length 4.5mm | ||
Standards/Approvals ISO 11898-2, RoHS | ||
Automotive Standard AEC-Q100 | ||
The Infineon HS CAN transceiver with partial networking is interface between the physical bus layer and the CAN protocol controller, the HS CAN transceiver with partial networking drives the signals to the bus and protects the microcontroller from interference generated within the network. Based on the high symmetry of the CANH and CANL signals, the HS CAN transceiver with partial networking provides a very low level of electromagnetic emission within a wide frequency range, allowing the operation of the HS CAN transceiver with partial networking without a common mode choke in automotive and industrial applications. The HS CAN transceiver with partial networking is enclosed in an RoHS compliant PG-TSON-14 package and fulfils the requirements of the ISO11898-2.
HS CAN standard data rates up to 1MBit/s
CAN FD data rates up to 5 MBit/s
Wide common mode range for electromagnetic immunity
Very low electromagnetic emission
Excellent ESD robustness, ±10 kV according to IEC 61000-4-2
Independent supply concept on VCC and VBAT pins