Infineon TLT9251VLEXUMA1, CAN Transceiver 5 Mbps, 8-Pin TSON
- RS庫存編號:
- 258-1709
- 製造零件編號:
- TLT9251VLEXUMA1
- 製造商:
- Infineon
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 2 件）*
TWD90.00
(不含稅)
TWD94.50
(含稅)
添加 34 件 件可免費送貨
有庫存
- 4,868 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 2 - 8 | TWD45.00 | TWD90.00 |
| 10 - 98 | TWD40.50 | TWD81.00 |
| 100 - 248 | TWD38.00 | TWD76.00 |
| 250 - 498 | TWD32.50 | TWD65.00 |
| 500 + | TWD30.00 | TWD60.00 |
* 參考價格
- RS庫存編號:
- 258-1709
- 製造零件編號:
- TLT9251VLEXUMA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 5Mbps | |
| Sub Type | Interface IC | |
| Power Down Mode | High Speed | |
| Supply Current | 38mA | |
| Mount Type | Surface | |
| Interface Type | CAN | |
| Package Type | TSON | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Width | 3 mm | |
| Height | 1mm | |
| Length | 3mm | |
| Standards/Approvals | SAE J2284-4/-5, ISO 11898-2 (2016), RoHS | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 5Mbps | ||
Sub Type Interface IC | ||
Power Down Mode High Speed | ||
Supply Current 38mA | ||
Mount Type Surface | ||
Interface Type CAN | ||
Package Type TSON | ||
Pin Count 8 | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Width 3 mm | ||
Height 1mm | ||
Length 3mm | ||
Standards/Approvals SAE J2284-4/-5, ISO 11898-2 (2016), RoHS | ||
Automotive Standard AEC-Q100 | ||
The Infineon high speed CAN FD transceiver is s the latest high-speed CAN transceiver generation, used inside HS CAN networks for automotive and also for industrial applications. It is designed to fulfil the requirements of ISO 11898-2 physical layer specification and respectively also the SAE standards J1939 and J2284. The high speed CAN FD transceiver is available in a small, leadless PG-TSON-8 package. The PG-TSON-8 package supports the solder joint requirements for automated optical inspection and is RoHS compliant and halogen free. As an interface between the physical bus layer and the HS CAN protocol controller, the high speed CAN FD transceiver protects the microcontroller against interferences generated inside the network.
CAN short circuit proof to ground, battery, VCC and VIO
TxD time-out function
Very low CAN bus leakage current in power-down state
Over temperature protection
Protected against automotive transients according ISO 7637 and SAE J2962-2 standards
Green Product (RoHS compliant)