規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	onsemi
	Product Type	CAN Transceiver
	Maximum Data Rate	5Mbps
	Number of Transceivers	1
	Sub Type	CAN Transceiver
	Power Down Mode	Standby, Sleep
	Supply Current	6.2mA
	Package Type	SOIC
	Interface Type	CAN
	Pin Count	14
	Minimum Supply Voltage	5V
	Maximum Supply Voltage	18V
	ESD Protection	Yes
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	150°C
	Width	4 mm
	Standards/Approvals	No
	Length	8.75mm
	Series	NCV7343
	Height	1.75mm
	Automotive Standard	AEC-Q100

	選取全部
	品牌 onsemi
	Product Type CAN Transceiver
	Maximum Data Rate 5Mbps
	Number of Transceivers 1
	Sub Type CAN Transceiver
	Power Down Mode Standby, Sleep
	Supply Current 6.2mA
	Package Type SOIC
	Interface Type CAN
	Pin Count 14
	Minimum Supply Voltage 5V
	Maximum Supply Voltage 18V
	ESD Protection Yes
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 150°C
	Width 4 mm
	Standards/Approvals No
	Length 8.75mm
	Series NCV7343
	Height 1.75mm
	Automotive Standard AEC-Q100

Datasheet - NCV7343D20R2G

The ON Semiconductor NCV7343 series CAN FD transceiver is the interface between a controller area network protocol controller and the physical bus. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. It guarantees additional timing parameters to ensure robust communication at data rates beyond 1 Mbps to cope with CAN flexible data rate requirements.

Ideal for transmitting large payload messages

Very low current consumption in standby and sleep operating mode

Minimum bus loading when unpowered

Allows for higher number of bus nodes

Robust remote wake-up mechanism

Extra bus wires diagnostics

onsemi, CAN Transceiver 5 Mbps, 14-Pin SOIC

相關連結