Microchip MCP2561T-E/SN, CAN Transceiver 1 Mbps, 8-Pin SOIC
- RS庫存編號:
- 177-3154P
- 製造零件編號:
- MCP2561T-E/SN
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
暫時無法供應
我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。
- RS庫存編號:
- 177-3154P
- 製造零件編號:
- MCP2561T-E/SN
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 1 Mbps | |
| Pin Count | 8 | |
| Package Type | SOIC | |
| Automotive Standard | AEC-Q100 | |
| Height | 1.5 mm | |
| Interface Type | CAN | |
| Length | 4.9 mm | |
| Maximum Operating Temperature | 125 °C | |
| Maximum Supply Voltage | 5.5 V | |
| Minimum Operating Temperature | -40 °C | |
| Minimum Supply Voltage | 4.5 V | |
| Mount Type | Surface | |
| Number of Transceivers | 1 | |
| Power Down Mode | Standby | |
| Series | MCP2561 | |
| Standards/Approvals | ISO-11898 | |
| Sub Type | Transceiver | |
| Supply Current | 70 mA | |
| Width | 3.9 mm | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 1 Mbps | ||
Pin Count 8 | ||
Package Type SOIC | ||
Automotive Standard AEC-Q100 | ||
Height 1.5 mm | ||
Interface Type CAN | ||
Length 4.9 mm | ||
Maximum Operating Temperature 125 °C | ||
Maximum Supply Voltage 5.5 V | ||
Minimum Operating Temperature -40 °C | ||
Minimum Supply Voltage 4.5 V | ||
Mount Type Surface | ||
Number of Transceivers 1 | ||
Power Down Mode Standby | ||
Series MCP2561 | ||
Standards/Approvals ISO-11898 | ||
Sub Type Transceiver | ||
Supply Current 70 mA | ||
Width 3.9 mm | ||
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum propagation delay was improved to support longer bus length.The device family members are MCP2561FD with SPLIT pin & MCP2562FD with VIO pin
Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
CAN Bus Pins are
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V
- Amphenol Industrial Pin Contacts Screw
- Honeywell Amplified Airflow Sensor AWM3000 Series