Microchip, CAN Transceiver 8 Mbps, 8-Pin SOIC
- RS庫存編號:
- 177-1627
- 製造零件編號:
- MCP2558FD-H/SN
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 管，共 100 件）*
TWD2,680.00
(不含稅)
TWD2,814.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1,600 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 100 - 400 | TWD26.80 | TWD2,680.00 |
| 500 + | TWD26.20 | TWD2,620.00 |
* 參考價格
- RS庫存編號:
- 177-1627
- 製造零件編號:
- MCP2558FD-H/SN
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Product Type | CAN Transceiver | |
| Maximum Data Rate | 8Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | CAN Transceiver | |
| Power Down Mode | Silent | |
| Supply Current | 70mA | |
| Mount Type | Surface | |
| Interface Type | CAN | |
| Package Type | SOIC | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| ESD Protection | Yes | |
| Maximum Operating Temperature | 150°C | |
| Height | 1.5mm | |
| Length | 4.9mm | |
| Series | MCP2558FD | |
| Standards/Approvals | No | |
| Width | 3.9 mm | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Product Type CAN Transceiver | ||
Maximum Data Rate 8Mbps | ||
Number of Transceivers 1 | ||
Sub Type CAN Transceiver | ||
Power Down Mode Silent | ||
Supply Current 70mA | ||
Mount Type Surface | ||
Interface Type CAN | ||
Package Type SOIC | ||
Pin Count 8 | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
ESD Protection Yes | ||
Maximum Operating Temperature 150°C | ||
Height 1.5mm | ||
Length 4.9mm | ||
Series MCP2558FD | ||
Standards/Approvals No | ||
Width 3.9 mm | ||
Automotive Standard AEC-Q100 | ||
The MCP2557/8FD is a Microchip Technology Inc. high-speed CAN transceiver/CAN Flexible Data Rate Transceiver with Silent Mode. The device family members are MCP2557FD with No Connect pin 5 & MCP2558FD with VIO pin internal level shifting
Supports both Classic CAN or CAN Flexible Data Rate applications
Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
Supports Silent Mode
Prevent disruption on the network due to local fault
Increased system reliability through redundancy
Test connection of the network
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.7V to 5.5V I/O
CAN Bus Pins are Disconnected when Device is Unpowered
An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
Detection of Ground Fault:
Permanent Dominant Detection on TXD
Permanent Dominant Detection on Bus
Power-on Reset and Voltage Brown-Out Protection on VDD Pin
Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)