Igus 15 Black, W36mm x D24 mm, L1000.00 mm, 48 mm Min. Bend Radius, Igumid GLW
- RS庫存編號:
- 185-2809
- 製造零件編號:
- 15.025.048.0
- 製造商:
- Igus
小計（1 件）*
TWD2,183.00
(不含稅)
TWD2,292.15
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 22 件準備從其他地點送貨
- 加上 1 件從 2026年8月21日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD2,183.00 |
* 參考價格
- RS庫存編號:
- 185-2809
- 製造零件編號:
- 15.025.048.0
- 製造商:
- Igus
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Igus | |
| Width | 36mm | |
| Product Type | Cable Trunking | |
| Depth | 24mm | |
| Colour | Black | |
| Material | Igumid GLW | |
| Length | 1m | |
| Minimum Bend Radius | 48mm | |
| Fire Behaviour | Self-Extinguishing, Flame Retardant | |
| Series | 15 | |
| Integrated Strain Relief | Yes | |
| Standards/Approvals | REACH, RoHS | |
| 選取全部 | ||
|---|---|---|
品牌 Igus | ||
Width 36mm | ||
Product Type Cable Trunking | ||
Depth 24mm | ||
Colour Black | ||
Material Igumid GLW | ||
Length 1m | ||
Minimum Bend Radius 48mm | ||
Fire Behaviour Self-Extinguishing, Flame Retardant | ||
Series 15 | ||
Integrated Strain Relief Yes | ||
Standards/Approvals REACH, RoHS | ||
- COO (Country of Origin):
- DE
Igus igubal Series Bearing Unit, 20mm Inside Diameter, 5500N Static Load Rating - EFOM-20
This bearing unit is a self-aligning support designed for rotating shafts in automation and mechanical assemblies. It provides a housed bearing solution that simplifies installation and compensates for minor misalignment, making it suitable for continuous operation in industrial equipment where straightforward mounting and dependable shaft support are required.
Features and Benefits:
• Inside bore 20mm delivers direct integration with standard shaft sizes
• Static load capacity 5500N supports substantial stationary forces
• Two mounting holes permit secure attachment and stable operation
• Mount hole spacing 69.1mm aligns with common fixture patterns
• Mount holes sized 8.4mm accept standard metric fasteners
• Manufactured from Igumid G material for wear-resistant contact surfaces
• Static load capacity 5500N supports substantial stationary forces
• Two mounting holes permit secure attachment and stable operation
• Mount hole spacing 69.1mm aligns with common fixture patterns
• Mount holes sized 8.4mm accept standard metric fasteners
• Manufactured from Igumid G material for wear-resistant contact surfaces
Applications
• Suitable for conveyor shaft support in manufacturing lines
• Ideal for actuator and drive assemblies in automation systems
• Used with rotary stages in electronic assembly equipment
• Can be used for motor shaft bearing support in electrical enclosures
• Ideal for actuator and drive assemblies in automation systems
• Used with rotary stages in electronic assembly equipment
• Can be used for motor shaft bearing support in electrical enclosures
What mounting footprint is required for fitting?
The unit requires a centre-to-centre hole spacing of 69.1mm with two holes sized for 8.4mm fasteners to secure it to a mounting surface.
Which shaft diameter will fit without additional adapting?
A 20mm shaft can be installed directly into the internal bore without the need for inserts or adaptors.
How does the material choice affect contact performance?
The Igumid G construction offers a polymer contact surface that reduces friction and withstands sliding wear in bearing interfaces.
How compact is the unit for space-constrained assemblies?
The housing measures 89mm in width and 46.5mm in length with a depth of 20 mm, allowing installation where lateral space is limited.
What static loads can the support resist when stationary?
It is rated to carry a static load of 5500 N, suitable for applications with significant non-rotational forces.