最近搜索

    Moflash E1EX Series Brass Nickel Plated Brass Cable Gland, M20 Thread, 14.5mm Min, 20.5mm Max, IP66, IP68

    RS庫存編號:
    901-0637
    製造零件編號:
    50200
    製造商:
    Moflash
    Moflash
    查看所有Cable Glands
    29 "將在 2 工作日發貨 (本地庫存) "
    90 在6 工作日內發貨 (海外庫存)
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD712.00

    您付款

    TWD641.00

    (不含稅)

    TWD673.05

    (含稅)

    單位Per unit
    1 +TWD641.00
    RS庫存編號:
    901-0637
    製造零件編號:
    50200
    製造商:
    Moflash

    產品概覽和技術數據資料表


    法例與合規


    產品詳細資訊

    E1EX Captive Component Gland for Explosive Atmospheres


    The E1EX Captive Component Gland is designed for use with steel wire and aluminium armoured cable in hazardous areas with a potentially explosive atmosphere. Equipment protection levels: Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db II 2G, II 2D, II 3G.

    For indoor, outdoor and Group II hazardous areas
    Two part handling, no loose parts
    Captive Cone and Cone Ring provide an armour clamp and earth bond for steel wire armour and aluminium armour
    Patented disconnect system that allows inspection of armour clamp and inner seal after assembly
    Factory fitted with a specially formulated elastomeric seal for built-in safety, seals on the inner sheath of the cable to IP66 / IP68
    Precision manufactured from high quality brass (marine grade electroless nickel plated) or stainless steel
    Complete with a sealing gasket and end cap safety gauge for correct gland selection

    Approvals

    ATEX, IECEx, INMETRO, SANS/IEC.

    Moflash Cable Gland Without Locknut, 20.5mm, M20 Thread Size - E1EX Series - 50200


    This cable gland from Moflash is designed to seal an electrical cable and hold it in place on the electrical equipment. It's intended for use with steel-wire and aluminium-armoured cables in hazardous areas where the atmosphere's potentially explosive. The clamp is factory-fitted with a specially formulated elastomeric seal for built-in safety, while its captive cone and cone ring combine to provide an armour clamp and earth bond, preventing electric shocks. A patented disconnect system lets you inspect the armour clamp and inner seal after assembly, for easy maintenance. This gland accepts cables from 14.5mm to 20.5mm.

    Features and Benefits


    • ATEX certification means it's safe for use in potentially explosive environments
    • IP66 and IP68 (ingress protection) ratings indicate protection against dust, water jets and submersion
    • Nickel-plated brass material is robust and corrosion-resistant for long service life
    • Wide operational temperature range of -20°C to +95°C to cope with extreme conditions

    Application Information


    • Oil and gas industries
    • Mining industry
    • Pharmaceutical manufacturing
    • Woodworking

    What is ATEX certification?


    ATEX specifications require that any certified equipment used in potentially explosive atmospheres must not form a source of ignition, or pose a health and safety threat to workers or property.


    規格

    屬性
    Thread SizeM20
    Maximum Cable Diameter20.5mm
    Minimum Cable Diameter14.5mm
    MaterialNickel Plated Brass
    ColourBrass
    SeriesE1EX
    IP RatingIP66, IP68
    Locknut IncludedNo
    Hazardous Area CertificationATEX
    Maximum Operating Temperature+95°C
    Minimum Operating Temperature-20°C
    Operating Temperature Range-20 → +95 °C
    29 "將在 2 工作日發貨 (本地庫存) "
    90 在6 工作日內發貨 (海外庫存)
    Add to Basket
    單位

    已增加

    單價(不含稅) 個

    原價 TWD712.00

    您付款

    TWD641.00

    (不含稅)

    TWD673.05

    (含稅)

    單位Per unit
    1 +TWD641.00