ETA X222.611 Busbar, 24 V dc, 59.5 mm Pitch

查看所有Busbars
暫時缺貨
RS庫存編號:
723-4875
製造零件編號:
X222.611.59 BUSBAR (PACK OF 10)
製造商:
ETA
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

ETA

Rated Operational Voltage

24 V dc

Product Type

Busbar

For Use With

ESX10-T

Standards/Approvals

No

Series

X222.611

Pitch

59.5mm

Number of Modules

5

COO (Country of Origin):
DE

ESX10-T Electronic Circuit Protectors


Electronic circuit protector type ESX10-T is designed to ensure selective disconnection of DC24V load systems. By active current limitation, ESX10-T responds much faster to overload or short circuit conditions than switch-mode power supply. The ESX10-T limits the highest possible current to 1.3 to 1.8 times the selected rated current of the circuit protector. It is therefore possible to switch on capacitive loads of up to 20,000μF, but they are disconnected only in the event of an overload or short circuit.

Selective load protection, electronic trip characteristics

Reliable overload disconnection with 1.1 x lN plus, even with long load lines or small cable cross sections

Manual ON/OFF button (S1)

Status and failure indication through LED, status output SF or Si contact F

Integral fail-safe element adjusted to current rating

Can be snapped onto symmetrical rails for ease of installation and space-saving in control cabinets

Ease of wiring through busbar LINE+ and 0 V as well as signal bars and bridges

Approvals

UL, CSA

相關連結