Vishay Bridge Rectifier, 6A, 800V, 4-Pin
- RS庫存編號:
- 903-2488
- 製造零件編號:
- GSIB680-E3/45
- 製造商:
- Vishay
可享批量折扣
小計（1 管，共 20 件）*
TWD1,138.00
(不含稅)
TWD1,194.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 880 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每管* |
|---|---|---|
| 20 - 180 | TWD56.90 | TWD1,138.00 |
| 200 - 580 | TWD55.10 | TWD1,102.00 |
| 600 - 780 | TWD53.50 | TWD1,070.00 |
| 800 - 1180 | TWD52.40 | TWD1,048.00 |
| 1200 + | TWD51.40 | TWD1,028.00 |
* 參考價格
- RS庫存編號:
- 903-2488
- 製造零件編號:
- GSIB680-E3/45
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Peak Average Forward Current | 6A | |
| Bridge Type | Single Phase | |
| Peak Reverse Repetitive Voltage | 800V | |
| Mounting Type | Through Hole | |
| Package Type | GSIB-5S | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 180A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -55 °C | |
| Peak Forward Voltage | 950mV | |
| Peak Reverse Current | 10µA | |
| Dimensions | 30 x 4.6 x 20mm | |
| Length | 30mm | |
| Width | 4.6mm | |
| Height | 20mm | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Peak Average Forward Current 6A | ||
Bridge Type Single Phase | ||
Peak Reverse Repetitive Voltage 800V | ||
Mounting Type Through Hole | ||
Package Type GSIB-5S | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 180A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -55 °C | ||
Peak Forward Voltage 950mV | ||
Peak Reverse Current 10µA | ||
Dimensions 30 x 4.6 x 20mm | ||
Length 30mm | ||
Width 4.6mm | ||
Height 20mm | ||
- COO (Country of Origin):
- CN
SIL PCB Mounting, GSIB-5 Series, Vishay Semiconductor
GSIB-5 series bridge rectifiers in SIL PCB Mounting package from Vishay Semiconductor
Thin Single In-Line GSIB-5 package
Glass passivated chip junction
High surge current capability
High dielectric strength case of 2500Vrms
Soldering pins for Printed Circuit Board (PCB) through-hole mounting
Glass passivated chip junction
High surge current capability
High dielectric strength case of 2500Vrms
Soldering pins for Printed Circuit Board (PCB) through-hole mounting
Approvals
UL file E54214
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.