Vishay Bridge Rectifier, 4A, 800V, 4-Pin
- RS庫存編號:
- 813-0730
- 製造零件編號:
- KBL08-E4/51
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 5 件）*
TWD452.00
(不含稅)
TWD474.60
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 55 件準備從其他地點送貨
- 最終 90 件從 2026年1月02日 起發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 70 | TWD90.40 | TWD452.00 |
| 75 - 145 | TWD88.20 | TWD441.00 |
| 150 + | TWD87.40 | TWD437.00 |
* 參考價格
- RS庫存編號:
- 813-0730
- 製造零件編號:
- KBL08-E4/51
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Bridge Type | Single Phase | |
| Peak Average Forward Current | 4A | |
| Peak Reverse Repetitive Voltage | 800V | |
| Mounting Type | Through Hole | |
| Package Type | KBL | |
| Pin Count | 4 | |
| Configuration | Single | |
| Peak Non-Repetitive Forward Surge Current | 200A | |
| Maximum Operating Temperature | +150 °C | |
| Minimum Operating Temperature | -50 °C | |
| Peak Forward Voltage | 1.1V | |
| Peak Reverse Current | 1mA | |
| Dimensions | 19.5 x 6.5 x 16.3mm | |
| Length | 19.5mm | |
| Height | 16.3mm | |
| Width | 6.5mm | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Bridge Type Single Phase | ||
Peak Average Forward Current 4A | ||
Peak Reverse Repetitive Voltage 800V | ||
Mounting Type Through Hole | ||
Package Type KBL | ||
Pin Count 4 | ||
Configuration Single | ||
Peak Non-Repetitive Forward Surge Current 200A | ||
Maximum Operating Temperature +150 °C | ||
Minimum Operating Temperature -50 °C | ||
Peak Forward Voltage 1.1V | ||
Peak Reverse Current 1mA | ||
Dimensions 19.5 x 6.5 x 16.3mm | ||
Length 19.5mm | ||
Height 16.3mm | ||
Width 6.5mm | ||
- COO (Country of Origin):
- CN
SIL PCB Mounting, KBL Series, Vishay Semiconductor
KBL series bridge rectifiers in SIL PCB Mounting package from Vishay Semiconductor
Soldering pins for Printed Circuit Board (PCB) through hole mounting
High surge current capability
High case dielectric strength of 1500Vrms
High surge current capability
High case dielectric strength of 1500Vrms
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.