Vishay Bridge Rectifier, 200 V 63 A, 4-Pin Single
- RS庫存編號:
- 395-2954
- 製造零件編號:
- VS-2KBP02
- 製造商:
- Vishay
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 包，共 5 件）*
TWD252.00
(不含稅)
TWD264.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 185 件準備從其他地點送貨
- 加上 700 件從 2026年2月17日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 5 + | TWD50.40 | TWD252.00 |
* 參考價格
- RS庫存編號:
- 395-2954
- 製造零件編號:
- VS-2KBP02
- 製造商:
- Vishay
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Vishay | |
| Product Type | Bridge Rectifier | |
| Peak Reverse Repetitive Voltage Vrrm | 200V | |
| Mount Type | Through Hole | |
| Number of Phases | 1 | |
| Package Type | D-44 | |
| Pin Count | 4 | |
| Configuration | Single | |
| Maximum Operating Temperature | 150°C | |
| Forward Current If | 2A | |
| Minimum Operating Temperature | -40°C | |
| Peak Non-Repetitive Forward Surge Current Ifsm | 63A | |
| Peak Forward Voltage Vf | 1V | |
| Height | 15mm | |
| Peak Reverse Current Ir | 10μA | |
| Width | 6.8 mm | |
| Standards/Approvals | No | |
| Length | 17.5mm | |
| Series | VS-2KBP | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Vishay | ||
Product Type Bridge Rectifier | ||
Peak Reverse Repetitive Voltage Vrrm 200V | ||
Mount Type Through Hole | ||
Number of Phases 1 | ||
Package Type D-44 | ||
Pin Count 4 | ||
Configuration Single | ||
Maximum Operating Temperature 150°C | ||
Forward Current If 2A | ||
Minimum Operating Temperature -40°C | ||
Peak Non-Repetitive Forward Surge Current Ifsm 63A | ||
Peak Forward Voltage Vf 1V | ||
Height 15mm | ||
Peak Reverse Current Ir 10μA | ||
Width 6.8 mm | ||
Standards/Approvals No | ||
Length 17.5mm | ||
Series VS-2KBP | ||
Automotive Standard No | ||
Vishay 2KBP Series Bridge Rectifiers
A 2 A single phase encapsulated bridge rectifier consisting of four single diodes connected as a full bridge. They are intended for general applications in industrial and consumer equipment.
• Suitable for printed circuit board mounting
• Compact construction
• High surge current capability
Bridge Rectifiers - Vishay Semiconductor
The Bridge Rectifier converts an Alternating Current (AC) input into a Direct Current (DC) output for full-wave rectification applications. The diode arrangement provides the same polarity of output for either polarity of input. A three-phase full-wave rectifier is an arrangement of six diodes in a bridge circuit configuration. The packages are designed for minimal size, highest reliability and maximum thermal performance.