onsemi DTA114YET1G Digital Transistor, -50 V PNP Surface SC-75, 3-Pin
- RS庫存編號:
- 186-8983
- 製造零件編號:
- DTA114YET1G
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 100 件）*
TWD210.00
(不含稅)
TWD220.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2,900 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 100 - 700 | TWD2.10 | TWD210.00 |
| 800 - 1400 | TWD2.00 | TWD200.00 |
| 1500 + | TWD2.00 | TWD200.00 |
* 參考價格
- RS庫存編號:
- 186-8983
- 製造零件編號:
- DTA114YET1G
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Product Type | Digital Transistor | |
| Package Type | SC-75 | |
| Maximum Collector Emitter Voltage Vceo | -50V | |
| Mount Type | Surface | |
| Transistor Configuration | Single | |
| Maximum Collector Base Voltage VCBO | 50V | |
| Maximum Power Dissipation Pd | 300mW | |
| Transistor Polarity | PNP | |
| Minimum DC Current Gain hFE | 15 | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Height | 0.9mm | |
| Width | 1.7mm | |
| Standards/Approvals | No | |
| Length | 1.65mm | |
| Series | DTA114YE | |
| Automotive Standard | AEC-Q101 | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Product Type Digital Transistor | ||
Package Type SC-75 | ||
Maximum Collector Emitter Voltage Vceo -50V | ||
Mount Type Surface | ||
Transistor Configuration Single | ||
Maximum Collector Base Voltage VCBO 50V | ||
Maximum Power Dissipation Pd 300mW | ||
Transistor Polarity PNP | ||
Minimum DC Current Gain hFE 15 | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Height 0.9mm | ||
Width 1.7mm | ||
Standards/Approvals No | ||
Length 1.65mm | ||
Series DTA114YE | ||
Automotive Standard AEC-Q101 | ||
This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors, a series base resistor and a base-emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space.
Simplifies Circuit Design
Reduces Board Space
Reduces Component Count
S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements, PPAP capable
These Devices are PbFree, Halogen Free/BFR Free