NSK-RHP Bearing Insert 50.8 mm ID 68.9 mm OD 1055-2G
- RS庫存編號:
- 785-4936
- 製造零件編號:
- 1055-2G
- 製造商:
- NSK-RHP
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 件）*
TWD2,545.00
(不含稅)
TWD2,672.25
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD2,545.00 |
| 5 - 9 | TWD2,441.00 |
| 10 + | TWD2,369.00 |
* 參考價格
- RS庫存編號:
- 785-4936
- 製造零件編號:
- 1055-2G
- 製造商:
- NSK-RHP
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | NSK-RHP | |
| Inside Diameter | 50.8mm | |
| Product Type | Bearing Insert | |
| Outside Diameter | 68.9mm | |
| Material | Cast Iron | |
| Static Load Rating | 29.2kN | |
| Dynamic Load Rating | 43.5kN | |
| Locking Type | Set Screw | |
| Series | 1000G | |
| Standards/Approvals | No | |
| Bore Type | Cylindrical | |
| Overall Width | 55.6mm | |
| Limiting Speed | 3100rpm | |
| 選取全部 | ||
|---|---|---|
品牌 NSK-RHP | ||
Inside Diameter 50.8mm | ||
Product Type Bearing Insert | ||
Outside Diameter 68.9mm | ||
Material Cast Iron | ||
Static Load Rating 29.2kN | ||
Dynamic Load Rating 43.5kN | ||
Locking Type Set Screw | ||
Series 1000G | ||
Standards/Approvals No | ||
Bore Type Cylindrical | ||
Overall Width 55.6mm | ||
Limiting Speed 3100rpm | ||
豁免
- COO (Country of Origin):
- GB
Self-Lube Bearing Inserts
For use with self-lube sealed bearing units or with user's own housings. Bearings are secured onto the shaft with a set-screw lock. When the axial load exceeds the limiting value, a shoulder should be provided on the shaft for the bearing inner ring to abut against so that the axial load is not transmitted through the set screws
相關連結
- NSK-RHP Bearing Insert 50 mm ID 68.9 mm OD 1055-50G
- NSK-RHP Bearing Insert 50.8 mm ID 62.4 mm OD 1050-2G
- NSK-RHP Bearing Insert 38.1 mm ID 52.4 mm OD 1040-1.1/2G
- NSK Insert Bearing 50 mm ID 100 mm OD 1055-50G
- NSK-RHP Bearing Insert 12 mm ID 40 mm OD 1017-12G
- NSK-RHP Bearing Insert 35 mm ID 55.6 mm OD 1235-35ECG
- NSK-RHP Bearing Insert 20 mm ID 28.3 mm OD 1120-20
- NSK-RHP Bearing Unit Insert 35 mm ID 36.5 mm OD ST35