小計（1 件）*
TWD957.00
(不含稅)
TWD1,004.85
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 3 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD957.00 |
* 參考價格
- RS庫存編號:
- 209-1871
- 製造零件編號:
- 1726206-2RS1
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Bearing Insert | |
| Inside Diameter | 30mm | |
| Outside Diameter | 62mm | |
| Material | Steel | |
| Static Load Rating | 11.2kN | |
| Dynamic Load Rating | 19.5kN | |
| End Type | Sealed | |
| Bore Type | Cylindrical | |
| Series | 1726206 | |
| Standards/Approvals | No | |
| Overall Width | 16mm | |
| Limiting Speed | 7500rpm | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Bearing Insert | ||
Inside Diameter 30mm | ||
Outside Diameter 62mm | ||
Material Steel | ||
Static Load Rating 11.2kN | ||
Dynamic Load Rating 19.5kN | ||
End Type Sealed | ||
Bore Type Cylindrical | ||
Series 1726206 | ||
Standards/Approvals No | ||
Overall Width 16mm | ||
Limiting Speed 7500rpm | ||
SKF 1726206 Series Bearing Insert, 30mm Inside Diameter, 62mm Outside Diameter - 1726206-2RS1
This bearing insert is a sealed steel insert designed to support rotating shafts in industrial equipment. It provides a compact, cylindrical-bore solution for applications requiring contained lubrication and protection from contaminants, enabling smooth operation within mechanical assemblies.
Features & Benefits
• 19.5 kN dynamic capacity provides sustained radial load handling
• 11.2 kN static rating resists heavy static forces
• Sealed end construction reduces ingress and maintenance needs
• Rated for 7,500 r/min supports higher-speed rotating systems
• Steel construction delivers mechanical robustness and wear resistance
• 11.2 kN static rating resists heavy static forces
• Sealed end construction reduces ingress and maintenance needs
• Rated for 7,500 r/min supports higher-speed rotating systems
• Steel construction delivers mechanical robustness and wear resistance
**Applications**
• Suitable for mounting in automation drive modules
• Ideal for motors and gearboxes in electrical drives
• Used with conveyor shaft supports in manufacturing lines
• Can be used for rotating assemblies in electronics manufacturing
• Used for bearing housings in mechanical handling equipment
• Ideal for motors and gearboxes in electrical drives
• Used with conveyor shaft supports in manufacturing lines
• Can be used for rotating assemblies in electronics manufacturing
• Used for bearing housings in mechanical handling equipment
What internal clearance and ring type are used for assembly fit?
The insert uses standard internal radial clearance with a conventional inner ring intended for cylindrical shafts, accommodating common shaft tolerances for press-fit or locating mounts.
What are the mass and handling considerations for installation?
Each unit weighs 0.19kg, permitting straightforward manual fitting and reducing the need for specialised lifting tools during assembly.
How does the bearing perform under repeated fatigue loading?
The fatigue endurance limit is specified by a fatigue load limit of 0.475 kN, indicating the sustained alternating load level for long-life applications.
Are there complementary accessories for seating and retention?
A rubber seating ring variant is listed as an associated product for use where additional housing sealing or axial support is required.
相關連結
- SKF Bearing Insert 30 mm ID 72 mm OD 1726306-2RS1
- SKF Bearing Insert 30 mm ID 62 mm OD YET 206
- SKF Bearing Insert 30 mm ID 62 mm OD YAT 206
- SKF Bearing Insert 30 mm ID 62 mm OD YAR 206-2RF
- SKF Bearing Insert 30 mm ID 62 mm OD YSA 206-2FK
- SKF Bearing Insert 30 mm ID 62 mm OD YAR 206-2F
- SKF Bearing Insert 30 mm ID 62 mm OD YEL 206-2F
- SKF Ball Bearing 25 mm ID 62 mm OD 1726305-2RS1