RS PRO Nickel Plated Brass Full Port, Ball Valve

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有Ball Valves
可享批量折扣

小計（1 件）*

TWD1,284.00

(不含稅)

TWD1,348.20

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 12 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
1 - 29TWD1,284.00
30 +TWD1,221.00

* 參考價格

RS庫存編號:
812-5154
製造商:
RS PRO
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

RS PRO

Product Type

Ball Valve

Valve Type

Full Port

Inlet Port Size

2 in

Body Material

Nickel Plated Brass

Minimum Operating Temperature

-40°C

Handle Material

Steel

Maximum Operating Temperature

170°C

Standards/Approvals

No

S.81 Side Drain Brass Ball Valve - 1/4 Turn


Application : Plumbing, Water

Drain the downstream or the whole line

Apply thermal or flow sensors

Apply pressure gauges

Divert the fluid to a new stream

Operating Temperature : -20ﾟC (-4ﾟF) / +170ﾟC (+350ﾟF)

Operating pressure : PN16 (230 PSI) up to 2’’, non-shock cold working pressure

Threads : ISO228 parallel female by female threads

Port : Full

Connections options : FxF

Stem Configuration : Blowout-proof nickel plated brass stem, with two FPM O-rings at the stem for maximum safety

Ball seats : Pure PTFE self-lubricating, with flexible-lip design

Body : Full port to DIN 3357 for maximum flow

100% Made in Italy

Chrome plated brass ball for longer life

Silicone-free lubricant on all seals

Travel stops on body to avoid stress at stem

24h 100% seal test guaranteed

Dual sealing system allows valve to be operated in either direction making installation easier

No metal-to-metal moving parts

No maintenance ever required

Handle clearly shows ball position

Quality : Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant; Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications

Hot forged sand blasted, nickel plated brass body and cap sealed with Loctite or equivalent thread sealant

Finest brass according to EN 12165 and EN 12164 (formerly

DIN 17660 and UNI 5705-65) specifications

Double side drain allows easy and safe downstream line venting

Working Pressure:

16 Bar Kg/cm2 (230 PSI)

non-shock cold working pressure

Applicable to valve, not to side tap

Flow:

Full port to DIN 3357 for maximum flow

Thread:

ISO 228 parallel female by female threads

G 1/4in. ISO 228 drain on both side

Seals:

Pure PTFE self-lubricating seats with flexible-lip design

Ball Valve, Standard, Padlockable and Panel Mount


These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Note

Approvals apply to specific configurations only

Approvals

GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant

Warning

Freezing of the fluid in the installation may severely damage the valve

相關連結