SKF QJ 203 N2MA/C2L 1 Row Ball Bearing - 17 mm ID, 40 mm OD 12 mm Race Width

小計(1 件)*

TWD7,752.00

(不含稅)

TWD8,139.60

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 3 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD7,752.00

* 參考價格

RS庫存編號:
208-0392
製造零件編號:
QJ 203 N2MA/C2L
製造商:
SKF
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

SKF

Inside Diameter

17mm

Product Type

Ball Bearing

Outside Diameter

40mm

Race Width

12mm

Ball Material

Steel

Cage Material

Machined Metal

End Type

Open

Number of Rows

1

Contact Angle

35°

Static Load Rating

11.4kN

Internal Clearance

C2

Dynamic Load Rating

17kN

Standards/Approvals

No

Bore Type

Parallel

Series

QJ

Limiting Speed

30000rpm

Bearing Type

Four Point Contact

COO (Country of Origin):
AT

SKF Series QJ Ball Bearing, 17mm Inside Diameter, 40mm Outside Diameter - QJ 203 N2MA/C2L


This ball bearing is a single-row four-point-contact component designed to accommodate combined radial and axial loads in Compact rotating assemblies. It operates in high-speed applications where precise contact geometry and controlled internal clearance are required, and it is supplied with an open end and a parallel bore for direct shaft mounting.

Features and Benefits:


• 30000 r/min limiting speed enables high-speed operation
• C2 internal clearance improves axial stiffness under load
• 35° contact angle provides enhanced axial load capacity
• Machined metal cage maintains ball spacing at high rpm
• Steel balls deliver consistent rolling-contact performance
• 17 kN dynamic rating supports substantial operational loads

Applications


• Suitable for Compact motor spindle assemblies
• Ideal for precision rotary indexing units
• Used with small gearbox shafts requiring axial load support
• Can be used for high-speed pump rotor bearings
• Used for combined radial and axial load-bearing shafts

What mounting configuration does it require?


It fits directly onto a shaft with a parallel bore and open end for straightforward axial positioning.

How does the bearing handle axial forces in both directions?


The four-point-contact layout shares axial loads through a 35° contact angle to sustain thrust in either direction.

What material considerations affect wear resistance?


The rolling elements are steel balls combined with a machined metal cage to preserve rolling contact under cyclic loads.

How should operating speed be managed relative to ratings?


Maintain rotational speed at or below 30 000 r/min to align with the specified limiting speed and preserve service life.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。