FAG 6002-C-C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- RS庫存編號:
- 190-8387
- 製造零件編號:
- 6002-C-C3
- 製造商:
- FAG
小計（1 件）*
TWD158.00
(不含稅)
TWD165.90
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年3月16日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD158.00 |
* 參考價格
- RS庫存編號:
- 190-8387
- 製造零件編號:
- 6002-C-C3
- 製造商:
- FAG
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FAG | |
| Inside Diameter | 15 mm | |
| Product Type | Ball Bearing | |
| Outside Diameter | 32 mm | |
| Race Width | 9mm | |
| Cage Material | Steel | |
| Ball Material | Steel | |
| End Type | Open | |
| Number of Rows | 1 | |
| Internal Clearance | C3 | |
| Static Load Rating | 2.85kN | |
| Dynamic Load Rating | 6kN | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Limiting Speed | 37000rpm | |
| Race Type | Plain | |
| Bearing Type | Single Row Deep Groove Ball | |
| 選取全部 | ||
|---|---|---|
品牌 FAG | ||
Inside Diameter 15 mm | ||
Product Type Ball Bearing | ||
Outside Diameter 32 mm | ||
Race Width 9mm | ||
Cage Material Steel | ||
Ball Material Steel | ||
End Type Open | ||
Number of Rows 1 | ||
Internal Clearance C3 | ||
Static Load Rating 2.85kN | ||
Dynamic Load Rating 6kN | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Limiting Speed 37000rpm | ||
Race Type Plain | ||
Bearing Type Single Row Deep Groove Ball | ||
High and very high speeds are required
The bearing arrangement must be operated with very low friction
Very low running noise is required, without reducing the speed, load carrying capacity and operating life of the bearing (Generation C)
High demands are made on the sealing of the bearing, without increasing heat generation or limiting the speed (Generation C)
The bearing position is to be designed particularly economically
Double row bearings can be considered for bearing arrangements where:
The load carrying capacity of single row deep groove ball bearings is no longer sufficient
Axial loads in both directions and/or tilting moments must be supported in addition to radial loads
A high load carrying capacity is required and the design envelope available in a radial and axial direction is relatively small
相關連結
- FAG 6002-C-2HRS-C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2Z-C3 1 Row Deep Groove Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- SKF 6002/C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2Z 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- FAG 6002-C-2HRS 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- SKF 6002-2RSH/C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD
- SKF 6002-2Z/C3 1 Row Ball Bearing - 15 mm ID, 32 mm OD