可享批量折扣
查看批量定價選項小計（1 盒，共 10 件）*
TWD1,131.00
(不含稅)
TWD1,187.55
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 3 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
箱 | 每盒 | 每單位* |
|---|---|---|
| 1 - 24 | TWD1,131.00 | TWD113.10 |
| 25 + | TWD1,102.00 | TWD110.20 |
* 參考價格
- RS庫存編號:
- 766-2431
- 製造零件編號:
- FC110075452
- 製造商:
- 3M
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | 3M | |
| Product Type | Flap Wheel | |
| Abrasive Material | Aluminium Oxide | |
| Grit Size | P60 | |
| Sub Type | Flap Wheel | |
| Diameter | 30mm | |
| Face Width | 10mm | |
| Maximum Safe Speed | 25400rpm | |
| Shank Size | 6mm | |
| Standards/Approvals | No | |
| Series | 339 | |
| 選取全部 | ||
|---|---|---|
品牌 3M | ||
Product Type Flap Wheel | ||
Abrasive Material Aluminium Oxide | ||
Grit Size P60 | ||
Sub Type Flap Wheel | ||
Diameter 30mm | ||
Face Width 10mm | ||
Maximum Safe Speed 25400rpm | ||
Shank Size 6mm | ||
Standards/Approvals No | ||
Series 339 | ||
豁免
3M 339 Series Flap Wheel, 30mm Diameter, 10mm Face Width - FC110075452
This flap wheel is an abrasive rotary tool designed for surface finishing and material removal on metal components within industrial settings. It combines layered abrasive flaps on a rotating mount to produce consistent blending and edge rounding during manual or machine-held operations. The tool is intended for use with powered rotary tools where controlled, repeatable surface conditioning is required.
Features and Benefits:
• Aluminium oxide abrasive for Durable stock removal • P60 grit for medium-coarse surface preparation • 25,400 r/min maximum safe speed for high-rate finishing • 6mm shank for compatibility with common rotary collets • 10mm face width for narrow access and profile conformity
Applications
• Suitable for deburring machined metal edges in automation cells • Ideal for preparing soldering areas in electronics assembly • Used for removing scale on electrical enclosures prior to painting • Can be used for blending weld seams in mechanical fabrication
What material does the abrasive consist of and why is it chosen?
The construction uses aluminium oxide which offers a balance of durAbility and cutting Ability suitable for ferrous and some non-ferrous metal finishing tasks.
What collet size is required to fit the tool into standard rotary equipment?
The tool uses a 6mm shank, compatible with chucks and collets that accept that diameter for secure mounting.
How does the grit influence the finish produced?
The P60 abrasive grade provides medium-coarse cutting action, effective for surface levelling and preparing substrates for further finishing processes.
Can it be operated at high rotational speeds safely?
Operation is intended up to a maximum safe speed of 25,400 r/min
users should ensure their equipment does not exceed this limit and inspect the tool before use.