可享批量折扣
查看批量定價選項小計（1 包，共 3 件）*
TWD392.10
(不含稅)
TWD411.72
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 1,104 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 3 - 12 | TWD130.70 | TWD392.10 |
| 15 + | TWD107.70 | TWD323.10 |
* 參考價格
- RS庫存編號:
- 189-5756
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Product Type | Abrasive Wheel | |
| Abrasive Material | Aluminium Oxide | |
| Grit Size | P120 | |
| Sub Type | Flap Wheel | |
| Diameter | 30mm | |
| Face Width | 20mm | |
| Maximum Safe Speed | 16500rpm | |
| Quantity Per Package | 3Per Pack | |
| Shank Size | 6mm | |
| Standards/Approvals | No | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Product Type Abrasive Wheel | ||
Abrasive Material Aluminium Oxide | ||
Grit Size P120 | ||
Sub Type Flap Wheel | ||
Diameter 30mm | ||
Face Width 20mm | ||
Maximum Safe Speed 16500rpm | ||
Quantity Per Package 3Per Pack | ||
Shank Size 6mm | ||
Standards/Approvals No | ||
豁免
- COO (Country of Origin):
- CN
RS PRO Aluminium Oxide Flap Wheel, 30 mm Diameter, P40, P80, P120 Grit
Get the finish you need on your metalwork with this set of RS PRO flap wheels. This pack of three comes with P40, P80 and P120 grit sizes for course and fine sanding of surfaces. These abrasive flaps are made from a hard aluminium oxide, making them suitable for deburring steel and cleaning rusty iron.
These are designed for use with your electric or air drill at speeds up to 16500 rpm (revolutions per minute) for quick work over large areas. They come with standard-sized 6 mm spindles for mounting onto your power tool's chuck. Each wheel is clearly labelled so you can see at a glance what grit size you're using.
These flap wheels are flexible enough to prevent uneven sanding and ideally shaped for reaching inside tubing and pipework. Welders, fabricators and auto technicians use these accessories as an essential part of their finishing armoury.
Features and Benefits
• Aluminium oxide abrasive material
• Diameter of 30 mm
• P40, P80 and P120 grit sizes
• Shank diameter of 6 mm
• Flap wheel type